Product Brochure

Direct Drive Motor Blowers
M–47
GENTEQ
M–47
®
marsdelivers.com
Toll Free [phone] • Fax [phone]
www.marsdelivers.com
5KCP39 PSC Torsion
Flex Mount Motors
GE torsion-flex mount motors are
designed for direct drive furnace
blower applications. The unique
torsion- flex mounting speeds
installation while the special
steel of the torsion-flex bracket
absorbs vibration for quieter
operation. All models are
electrically reversible, 3-speed
motors of high efficiency Energy
$aver
®
design.
Features:
• Energy $aver
®
• All angle sleeve bearings
• 3-Speed 1075/925/775 RPM(1)
• Torsion-flex mounting, grommets
and sleeves included
• 5.0 inch long, 1/2 inch
diameter shaft
• Reversible rotation
Specifications:
• Class A insulation
• Single phase, 60/50 Hertz
• Overload protection
• Fan duty, continuous, air over
• Open construction
• 26 inch leads
B
A
(1) Approximately 150RPM differential between speeds depending on fan load (2) 60 Hz only
(3) Approximately 300RPM differential between speeds depending on fan load
PSC Direct Drive
Blower Motors
These GE 5KCP39 PSC motors are
designed for use as direct drive furnace
blower motors. All are three speed,
high efficiency, Energy $aver
®
models
and are electrically reversible. Motors
have 2-1/4 inch resilient rings for
base mounting. Four (4) split rings
included if 2-1/2 inch diameter is
required. Bases are sold separately.
Features:
• All angle sleeve bearings
• 3 speeds
• 1/2 inch extended thru bolts
• Ring kit allows 2-1/4 inch &
2-1/2 inch resilient ring mounting
• Reversible rotation
• 4 inch long, 1/2 inch diameter
shaft
• For accessories see pages
M-50 – M-54
Specifications:
• Single phase, 60/50 Hertz
• Overload protection
• Fan duty, continuous, air over
• Open construction
• 26 inch leads
• Class B insulation
B
C
A
Reversible Rotation — Energy $aver
®
MARS
NO.
GE NO.
5KCP39
HP VOLTS AMPS
CAP.
REQ.
DIMENSIONS
BASE
NO.
A B C
1075 RPM
(1)
— Three Speed - 6 Pole
03983
(2)
GG9708T 1/4 115 3.7 7.5/370 4.0 5.39/5.23 1/2 08057
03984 FG9478T 1/4 208-230 1.7 5/370 4.0 5.39/5.23 1/2 08057
03985
(2)
LG9683T 1/3 115 4.9 7.5/370 4.0 5.39/5.23 1/2 NA
03986 JG9479T 1/3 208-230 2.5 5/370 4.0 5.39/5.23 1/2 NA
03987 PG9710T 1/2 115 7.3 10/370 4.0 5.89/5.73 1/2 NA
03988 NG9709T 1/2 208-230 3.5 7.5/370 4.0 5.89/5.73 1/2 NA
03989
(2)
PGE413T 3/4 115 9.1 15/370 4.0 5.89/5.73 1/2 NA
03990
(2)
PGE414T 3/4 208-230 4.4 10/370 4.0 5.89/5.73 1/2 NA
1625 RPM
(1)
— Three Speed - 4 Pole
03992 FGE211T 1/4 115 2.7 10/370 4.0 4.89 1/2 08055
03993 FGE212T 1/4 208-230 1.2 5/370 4.0 4.89 1/2 08055
03994 HGE213T 1/3 115 3.9 15/370 4.0 5.39 1/2 08057
03996 MGE215T 1/2 115 6.0 15/370 4.0 5.64 1/2 08058
03997 LGE216T 1/2 208-230 2.8 7.5/370 4.0 5.64 1/2 08058
03998 PGE415T 3/4 115 8.5 15/370 4.0 6.14 1/2 08060
03999 PGE416T 3/4 208-230 4.0 7.5/370 4.0 6.14 1/2 08060
1075 RPM — Reversible Rotation - Standard Efficiency - 6
Pole
MARS
NO.
GE NO.
5KCP39
HP VOLTS AMPS
CAP.
REQ.
DIMENSIONS
BASE
NO.
A B C
Three Speed
(1)
03583
(2)
FGN651T 1/4 115 4.2 5/370 4.0 4.89 1/2 08055
03584
(2)
FGN652T 1/4 208-230 2.0 5/370 4.0 4.89 1/2 08055
03585
(2)
JGN653T 1/3 115 6.2 5/370 4.0 5.14 1/2 08056
03586
(2)
JGN654T 1/3 208-230 2.9 5/370 4.0 5.14 1/2 08056
03587
(2)
PGN655T 1/2 115 9.0 5/370 4.0 6.14 1/2 08060
03588
(2)
NGN656T 1/2 208-230 4.3 5/370 4.0 5.89 1/2 NA
03589
(2)
PGN657T 3/4 115 10.3 15/370 4.0 6.14 1/2 08060
03590
(2)
PGN658T 3/4 208-230 4.6 10/370 4.0 6.14 1/2 08060
03595
(2)
SGL854S 1 115 11.8 20/370 4.0 6.90 1/2 08060
03596
(2)
SGL853S 1 208-230 5.59 15/370 4.0 6.90 1/2 08060
Two Speed
(3)
03383
(2)
FGM421S 1/4 115 4.2 5/370 4.0 4.89 1/2 08055
03384 FGM433S 1/4 208-230 2.0 5/370 4.0 4.89 1/2 08055
03385
(2)
JGM439S 1/3 115 6.2 5/370 4.0 5.14 1/2 08056
03386 JGM440S 1/3 208-230 2.9 5/370 4.0 5.14 1/2 08056
03387 PGM438S 1/2 115 9.0 5/370 4.0 6.14 1/2 08060
03388 NGM437S 1/2 208-230 4.3 5/370 4.0 5.89 1/2 NA
03389 PGN091T 3/4 115 10.3 15/370 4.0 6.14 1/2 08060
03390 PGN092T 3/4 208-230 4.4 10/370 4.0 6.14 1/2 08060
(1) Approximately 150RPM differential between speeds depending on fan load
(2) 60 Hz only
1075 RPM
(
1)
— Three Speed – Reversible Rotation - 6 Pole
MARS
NO.
GE NO.
5KCP39
HP VOLTS AMPS
CAP.
REQ.
DIMENSIONS
BLOWER
SIZE
A B
03783
(2)
GGP730S 1/4 115 3.7 7.5/370 5.0 4.23 9 in.
03784 FGP731S 1/4 208-230 1.7 5/370 5.0 4.23 9 in.
03785
(
2)
LGP732S 1/3 115 4.9 7.5/370 5.0 4.98 9 in.
03786 JGP733S 1/3 208-230 2.5 5/370 5.0 4.73 9 in.
03787 PGP734S 1/2 115 7.3 10/370 5.0 5.48 10 in.
03788 NGP735S 1/2 208-230 3.5 7.5/370 5.0 5.23 10 in.
03789
(2)
PGP736S 3/4 115 9.1 15/370 5.0 5.48 10 in.
03790
(2)
PGP737S 3/4 208-230 4.4 10/370 5.0 5.48 10 in.
5
1
⁄2 inch dia. 5
1
⁄2 inch dia.