Product Brochure

A
ll Angle And Shaft Up
Outdoor Condenser Fan
Motors
GE outdoor condenser fan motors
are available for vertical shaft-up
or vertical shaft-down applications.
Vertical shaft-up models are also
suitable for horizontal mounting.
Add MARS No. 08105 resilient
rings to base mount. All are
electrically reversible and have full
six inch shaft lengths. Models are
available with sleeve or ball
bearings, single or two speed in
high efficiency or standard
efficiency ratings.
Features:
• Reversible rotation
• Thru bolt or band mounting
• Water slinger on shaft
• Serrated end caps on vertical
shaft-up models
• Full six inch shaft length
• For accessories see pages
M-50 – M-54
• 6” shaft extension with 2 flats
90˚ apart
Specifications:
• Class “B” insulation
• Single phase, 60/50 Hertz
• Automatic thermal overload protected
• Fan duty, continuous, air over
• 26 inch leads
1075 RPM – Reversible Rotation – Energy $aver
®
– 6 Pole
SOS™ Multi-Horsepower
Outdoor Condenser
Fan Motors
Ball Bearing
MARS SOS™ multi-horsepower
condenser fan motors are ideal
for truck stock. Three 1075 RPM
models cover 208-230 volt
applications from 1/6 to 1/2 HP.
New Slim Stack™#03458,
WIZARD, and the new WIZARD
825 fit in many 1/3 HP
installations that will not accept
other manufacturer’s motors.
The 03458 is a single speed
“wide-range” motor that will run
at any fan load from 1/6 to 1/3 HP
at a nominal 1075 RPM. MARS
#03459, the new WIZARD 825, will
run at any fan load from 1/8 to 1/3
HP at a nominal 825 RPM.
All SOS™ motors feature easy
mounting in Rheem applications.
Features:
• Multi-HP
• Thru bolt or band mounting
• Rheem mounting capability
• Water slinger on shaft
• Air conditioning or heat pump duty
• Capacitor requirement noted on
motor label
• End Shield drain holes w/plugs
Specifications:
• Single phase, 60 Hz
• Overload protection
• Fan duty, continuous air over
• Totally enclosed,
Non-ventilated
• Class B insulation
Condenser Fan Motors
M–43
GENTEQ
M–43
®
marsdelivers.com
Toll Free [phone] • Fax [phone]
www.marsdelivers.com
MARS
NO.
GE NO.
5KCP39
HP VOLTS AMPS
DIMENSIONS
A B C
1075 RPM - 6 Pole
03458 JGU530S 1/3, 1/4, 1/5, 1/6 208-230 2.8 6.75 4.48 1/2
03458HS* LGU7215 1/3, 1/4, 1/5, 1/6 208-230 2.6 6.50 5.23 1/2
03465* LGU735S 1/3, 1/4, 1/5, 1/6 208-230 2.5 5.00 4.73 1/2
825 RPM - 8 Pole
03459* NFBA87S 1/3, 1/4, 1/5, 1/6, 1/8 208-230 1.8 6.50 5.48 1/2
03461* TFBA86S 1/2, 1/3, 1/4, 1/5, 1/6 208-230 2.8 6.50 6.48 1/2
03469* SGU732S 1/3, 1/4, 1/5, 1/6 208-230 2.0 6.50 5.98 1/2
Multi-Horsepower, Reversible Rotation
MARS
No.
A.O. SMITH EMERSON
03458
ORM5458 5458
03459
ORM5488B 5464
03465
FSE6000, FE6000 5462
03468
FE6002 5465
03469
FE6001 5464
Cross Reference:
* Heat Shield
* Heat Shield
W
izard
W
izard
W
i
z
a
r
d
8
2
5
W
i
z
a
r
d
8
2
5
(1) Lead-end endshield open construction
(2) Low speed approximately 300 RPM less than high speed depending on fan load
(3) 60 Hz operation only
MARS
NO.
GE NO.
5KCP39
HP VOLTS AMPS RPM
(2)
CAP
REQ.
DIMENSIONS
A B C
Two Speed - Sleeve Bearings - Vertical Shaft Up/Down - 6 Pole
03227
(3)
EGG401T 1/6 208-230 1.0 1075 5/370 6.0 4.00 1/2
03228
(3)
HGG402T 1/4 208-230 1.6 1075 5/370 6.0 4.50 1/2
03229
(3)
MGG403T 1/3 208-230 2.4 1075 7.5/370 6.0 5.00 1/2
03230
(3)
PGG404T 1/2 208-230 3.8 1075 10/370 6.0 5.50 1/2
Shaft-Up - Two Speed - Sleeve Bearings - 6 Pole
03027
(1)
DGA768T 1/6 208-230 0.9 1075 5/370 6.0 3.75 1/2
03028
(1)
GGA769T 1/4 208-230 1.5 1075 5/370 6.0 4.25 1/2
03029
(1)
LGA770T 1/3 208-230 2.1 1075 7.5/370 6.0 5.00 1/2
03030
(1)
NGS429S 1/2 208-230 3.2 1075 10/370 6.0 5.50 1/2
Shaft-Up - Two Speed - Ball Bearings - 6 Pole
03031
(1)
LGC003T 1/3 208-230 2.1 1075 7.5/370 6.0 4.98 1/2
03032
(1)
NGL785S 1/2 208-230 3.2 1075 10/370 6.0 5.48 1/2
03048
(1)
NGL762S 3/4 208-230 3.9 1075 15/370 6.0 5.48 1/2
5
1
⁄2 i
nch dia.
5
1
⁄2 inch dia.