Owner`s manual

MARQUIS SPAS • RELAXING YOUR WORLD 50
ZONE 2 B JETS
Six Whirlpool Jets (P). Turn the Jet
Selector Valve (6) to the south and press
ZONE 2 JETS pad (3) to turn pump on
low-speed. Press ZONE 2 JETS pad (3)
again to turn pump on high-speed.
ZONE 2 A JETS
All jets (F, H, J, K). Turn the Jet Selector
Valve (6) to the north and press ZONE 2
JETS pad (3) to turn pump on low-speed.
Press ZONE 2 JETS pad (3) again to turn
pump on high-speed. Adjust the jet
pressure (F, H, J) with Air Control
Valve
(5). Adjust the jet pressure (K) with Air
Control Valve (8). Open the Air Control
Valve (5) by turning the lever counter-
clockwise.
ZONE 1A JETS
Therapy Seat jets (E) and Cascade Neck
Jets (C). Turn the Jet Selector Valve (6) to
the east and press ZONE 1 JETS pad (2) to
turn pump on low-speed. Press ZONE 1
JETS pad (2) again to turn pump on high-
speed. Adjust the jet pressure with Air
Control Valve (5). Open the Air Control
Valve (5) by turning the lever counter-
clockwise. Cascade Neck Jets (C) are
independent of other jets. Control pressure
by turning Neck Je
t Valve (7).
ZONE 1B JETS
Three Geyser Jets (P) and Cascade Neck
Jets (C). Turn the Jet Selector Valve (6) to
the west. Press ZONE 1 JETS pad (2) to
turn pump on low-speed. Press ZONE 1
JETS pad (2) again to turn pump on high-
speed. Cascade Neck Jets (C) are
independent of other jets. Control
pressure by turning Neck Jet Valve (7).
VOYAGE ZONED JETTING
Shaded area: Jets On. White area: Jets Off.
A compass is used as a directional tool.
E
C
p
C
F
H
J
P
P
P
6 2 5
7
6
3
5
6
3
6 2
7
l
N
S
WE
8