Owner`s manual

500, 600, 700, 500LX, 600LX, and 700LX Spa Models
UNDERWATER LIGHT
The pad marked LIGHT ON/OFF turns the light on and off. The low-voltage system
produces a night light for evening use and makes entering and exiting the spa safer.
After being on for one hour, the light will automatically turn off.
JETS LOW/HIGH
Press the JETS LOW/HIGH pad to turn the primary jet pump on low-speed. Press the
pad again to turn the primary and auxiliary pump to high-speed. Pressing the pad again
turns the pump off.
After running on low-speed for 15 minutes the pump will automatically turn off. After
running on high-speed for 10 minutes the p ump will automatically s witch to low-speed
for five minutes and will then turn off.
CONSTANT CLEAN

FILTRATION WITH SMART LOGIC
Constant Clean

Filtration
Your spa is automatically preset to filter itself using the jet pump on low-speed for
two hours twice in a 24 hour period. The first filter cycle will begin one minute after
the spa is energized. The second filter cycle will begin 12 hours after the firs t cycle. See
PROGRAM FILTER to adjust cycles.
Smart Logic
This feature ensures that the spa water will be properly filtered after each spa use. 30
minutes after the spa light or jet pump has been deactivated, the pump runs on high-
speed
for five minutes, then on low-speed to filter the water for four hours.
Heat Demand Operation
In addition to those situations mentioned above, the pump will circulate on low-speed
whenever the thermostat calls for heat.
OPTIONAL SOLID-STATE OZONATOR
If you have the optional Solid-state Ozonator installed on your spa, it will function during
low-speed pump operation. It will be disabled for one hour whenever a pump or light
pad is pressed. At the conclusion of the ho ur, the low-speed pump and ozonator will
run for four hours. (Order model OZU-120 from Marquis Essentials

.)
MARQUIS SPAS • RELAXING YOUR WORLD 31
CONSTANT CLEAN

FILTRATION
CL: Clean Filter
CH: Change Water
MAINTENANCE
REMINDERS
TEMP
SET
HEAT ON
SOAK
TIMER
LIGHT
ON/OFF
JETS
LOW/HIGH
100°F
Soak Timer: 1st press turns pump to
low-speed and starts 59-minute
timer; 2nd press “all
quiet” mode
Temp Set:
Actual temperature displayed on
LCD; Press repeatedly to increase
temperature; Pause; Repeat to
decrease temperature
Heat On:
Illuminates when
heat is on
Jets Low/High:
1st press low-speed;
2nd press high-speed;
3rd press turns it off
LCD Display:
Shows temperature,
Maintenance Reminders
Light On/Off:
1st press turns underwater light
on; 2nd press turns it off
!
sport sERIES CONTROLS
sPORT sERIES