Owner`s manual

ZONE 1A JETS
All jets including Cascade Neck jets (C)
except Geyser jets (G). To activate jets:
Turn the Jet Selector Valve (6) to the east.
Press ZONE 1 JETS pad (2) to turn pump
on low-speed. Press ZONE 1 JETS pad
(2) again to turn pump on high-speed.
Adjust the jet pressure with the Air
Control Valve (5) by turning the lever
counterclockwise. Adjust the Cascade
Neck jets with Neck jet valve (3).
MARQUIS SPAS • RELAXING YOUR WORLD 23
ZONE 1A JETS
Therapy Seat jets (J) except center jet (A).
To activate jets: Turn the Jet Selector
Valve (6) to the east. Press ZONE 1 JETS
pad (2) to turn pump on low-speed. Press
ZONE 1 JETS pad (2) again to turn pump
on hi
gh-speed. Adjust the jet pressure
with the Air Control Valve (5). Open the
Air Control Valve by turning the lever
counterclockwise.
J
A
6
2
2
5
A
B
D
E
6
25
2
spirit ZONED JETTING
spirit lx ZONED JETTING
ZONE 1B JETS
Geyser jets (G) plus Cascade Neck jets
(C). To activate jets: Turn the Jet Selector
Valve (6) to the west. Press ZONE 1 JETS
pad (2) to turn pump on low-speed.
Press ZONE 1 JETS pad (2) again to turn
pump
on high-speed. Adjust the Cascade
Neck jets pressure with the Neck Jet
Control Valve (3) by turning the lever
counterclockwise.
C
G
G
C
5 6 2
3
5 6 2
3
Shaded areas: Jets On. White areas:
Jets Off. A compass is used as a
directional tool.
l
N
S
WE
ZONE 1B JETS
All jets in seats (B, D, E) plus jet (A).
To activate jets: Turn the Jet Selector
Valve (6) to the west. Press ZONE 1 JETS
pad (2) to turn pump on low-speed.
Press ZONE 1 JETS pad (2) again to turn
pump on hi
gh-speed. Adjust the jet
pressure with the Air Control Valve (5).
Open the Air Control Valve by turning the
lever coun terclockwise.