Owner`s manual

Sleep Mode (SL)

Your spa will maintain a water temperature that is 20°F

(7°C) below the set temperature. The heater functions

only during a filter cycle. The LCD window displays “SL”

flashing alternately with the actual temperature when

the spa is up to set temperature and displays “SL”

steadily when below set temperature.

To Adjust the Heat Mode:

First press the SETTING pad to display the heat mode

settings (St, Ec, SL). Use the TEMP+- pad to scroll

through the options. When desired selection has

been reached, press SETTING pad again to enter

selection and advance to the filter cycle settings (F1,

F2, F4, F6).

Maintenance Reminders

• CL: Clean Filter LED will illuminate every 30 days.

• CH: Change Water LED will illuminate every 90

days. To reset maintenance reminders, press SET-

TINGS pad.

SYSTEM LOCK

Once you find and establish the settings that work

best for your individual needs, use system lock to

keep from inadvertently changing the settings.

Press the TEMP+- pad and then immediately press

the SETTING pad. Unlock by repeating sequence.

While the system is locked, you may still operate the

jets and light. The LCD window displays LC to indicate

the system is locked when you try to change the

temperature or settings.

REMOTE CONTROLS (OPTION)

(See SPA CONTROL OPERATION, Jets)

SPA CONTROL OPERATION