Owner`s manual

maintenance
PAGE 70
AS NEEDED MAINTENANCE
1. Cover Care
It is recommended that you use Marquis Cover
Care Cleaner to keep the DuraCover cover clean
and conditioned. Proper care of the cover in-
creases the life and keeps it looking great in even
the harshest conditions. NOTE: Do not use
regular household products or products that
contain silicone, alcohol, steel wool, or bleach.
2. DuraWood Care
Clean the exterior of the spa with Marquis Dura-
Wood Cleaner. Our specially formulated cleaner
does not contain alcohol or high levels of solvents.
These ingredients (along with Acetone, Nitroben-
zene, and Cyclohexanol) can dissolve and discolor
the DuraWood exterior. For small cleaning jobs,
you can also use a mild soap and water solution.
3. Excess Debris
Grit and debris tracked into the spa should be
removed with a spa vacuum.
4. Water Line
To avoid buildup of oils and lotions at the water
line, clean the interior when needed. We suggest
the DuraMitt to clean without scratching.
NOTE: Do not use the same brush or mitt to clean
the exterior of the spa and the interior of the spa.
Soap and other product residue used on the
outside of the spa can cause foaming of the spa
water and scratches to the spa surface if used on
the inside of the spa.
5. Light Bulb Replacement:
A. Turn off the power to the spa.
B. Remove the equipment area door to find the
light access. (See EQUIPMENT DIAGRAM.)
C. Remove the lamp socket from the back of the
light assembly by turning counterclockwise and
pulling at the same time.
D. Gently pull the bulb out of the lamp socket and
replace it with a 6 watt bulb only (GE #918)
available from your spa dealer.
E. Install the lamp socket back into the light
assembly and replace door.
Marquis Maintenance
Kit includes: DuraWood
Cleaner, Cover Care
Cleaner, Fill Filter, Filter
Revive, Swirl Away
Plumbing Cleaner,
interior DuraMitt, and a
scrubby hand mitt for
exterior cabinet and
cover cleaning, all in a
handy storage bucket.
MARQUIS SPAS
DuraMitt cleans the
interior of the spa
without scratching.
Remove lamp socket
from back of light
assembly.