Owner`s manual

Chlorine Sanitizer – A fast dissolving, granular

product used for sanitizing the spa water. Dispensed

manually into the water as needed.

Crystal Clear Clarifier – Restores clarity to dull

water by combining unfilterable microscopic particles

into larger particles that can be effectively filtered.

Filter Revive – Keeps your filter operating efficiently

by removing grease, grime, and other buildup that

can impair the filtration process.

Foam Eliminator – Instantly rids the spa of undes-

ired foam.

Metal and Stain Control – Rids spa of minerals and

metals that can interfere with filtration, affect sanitizer

efficiency, and stain spa surfaces. Necessary if you

have well water or water with a high metal/mineral

concentration.

Nature

Spa Mineral Purifier – A natural, spa

mineral purifier that controls bacteria and prevents

algae from forming. Reduces the amount of chemical

sanitizer required to maintain healthy spa water.

Ozonator – A device that produces bacteria killing

ozone gas to assist in water sanitation. The use of an

ozonator significantly reduces the amount of chemi-

cal product needed to maintain clean, fresh water.

pH – The pH level is the measure of acidity and

alkalinity of the water. It is measured on a scale of 0 -

14. The ideal pH level is 7.2 - 7.6. When the pH level

falls below 7.2, damage to metal in the equipment

can occur. A pH level above 7.8 can reduce the

effectiveness of the sanitizer, and cause cloudiness

and scale formation. Improper pH levels can be

irritating to the eyes.

pH and Alkalinity Decrease – Decreases the pH

and alkalinity level of the water in your spa.

pH and Alkalinity Increase – Increases the pH and

alkalinity level of the water in your spa.

glossary

PAGE 64

MARQUIS SPAS