Owner`s manual

To Adjust the Heat Mode:

First press the SETTINGS pad to display the heat

mode settings (Std, Ecn, SLP). Use the TEMP– pad

to scroll through the options. When desired selection

has been reached, press SETTINGS pad again to

enter selection and advance to the filter cycle set-

tings (FC1, FC2, FC4, FC6).

SYSTEM LOCK

Once you find and establish the settings that work

best for your individual needs, use system lock to

keep from inadvertently changing the settings.

Press LOCK then press the TEMP- pad. Unlock by

repeating sequence. While the system is locked, you

may still operate the jets and light. The LCD window

displays LC to indicate the system is locked when

you try to change the temperature or settings.

JETS

Use JET pad on either bather’s panel or jet control

panel. First press JET pad to activate pump(s)* on

low-speed (and start the soak timer). Second press

of JET pad activates pump(s) on high-speed. Third

press of JET pad turns jets off for all-quiet soak

setting. Fourth press of JET pad returns pump(s) to

low-speed. After running on low- or high-speed for

15 minutes, the pump(s) automatically turns off.

*Quest and Destiny are one-pump systems.

PAGE 44

–

SETTINGS

TEMP-

JET

JET CONTROL PANEL

spa control operation

MARQUIS SPAS

LOCK