Owner`s manual

CONSTANT CLEAN WATER MANAGEMENT
WITH SMART LOGIC (Quest, Destiny, Reward,
Escape, Euphoria)
Factory Default Settings:
• Filter Cycle Duration: FC2 (2 hours)
• Filter Cycles: 2C (twice per day)
• Smart Logic: SL1 (1 hour)
These settings represent the most commonly used
settings, but your use may be different, depending
upon many variables – frequency, number of bathers,
duration, water capacity, etc. These variables affect
the quality of water and the way it should be man-
aged to achieve the most effective cleansing. Se-
lectable choices for the settings of the operation
systems allows flexibility and ensures your Marquis
spa remains easy to maintain for your particular set of
circumstances.
SOLID-STATE OZONATOR
The ozonator greatly reduces the amount of chemi-
cal sanitizer you need in the water to keep your
water clean. The ozonator functions whenever the
pump is running on low-speed. You should occasion-
ally inspect your ozonator to ensure it continues to
light (see MAINTENANCE, Every Three to Four
Months). A good time to do this is every three
months, when you drain and fill your spa.
CONSTANT CLEAN FILTRATION
Your spa is preset at the factory with a default setting
to filter itself using the jet pump on low-speed for two
hours twice in a 24-hour period. These settings
represent the filter settings necessary for average
use. The timing of the first filter cycle is determined
by when the spa was initially energized. The first
cycle begins six minutes after this initial power-up.
The second filter cycle begins 12 hours after the
first cycle.
To Adjust the Filter Settings
First press of the SETTINGS pad displays the filter
time settings (2C, 1Cd, 1Cn, FC1, FC2, FC4, FC6).
Use the TEMP- pad to scroll through the options.
When desired selection has been reached, press
SETTINGS pad again to enter selection and advance
to the filter cycle settings (2C, 1d, 1n).
PAGE 41
spa control operation
Marquis Ozonator
reduces the need for
chemical sanitizers.
MARQUIS SPAS
C
C
–
SETTINGS
TEMP-