Owner`s manual

PUMP PRIMING (Pr)

Pump priming feature begins at start-up. When your

spa is energized, the LCD window displays a “Pr”

message. This mode lasts approximately four to five

minutes, if not exited manually by pressing the

TEMP pad.

UNDERWATER AND ENTRYWAY LIGHTS

Press the LIGHT pad to turn the underwater and

entryway lights on and off. The low-voltage sys-

tem produces a night light for evening use and

makes entering and exiting the spa safer. After

being on for 30 minutes, the lights automatically

turn off. The bather’s control panel is backlit for

ease of use after dark.

OPTIONAL WATERCOLORS™*

Press LIGHT pad to turn on step one. Press LIGHT

pad again to turn off for one second. Then press

LIGHT pad again for step two. Repeat for all eight

options: 1) color wash, 2) white, 3) blue/green, 4)

violet, 5) blue, 6) yellow, 7) green, 8) red.

*(12 LED Part #8115; 24 LED Part #8120)

SOAK TIMER AND SOAK FEATURE

The soak timer starts the first time you press a JET

pad. The LCD window displays the elapsed time (1-

30) for 55 seconds then switches to the current

water temperature for five seconds then back to the

timer. It continues to alternate for the entire 30

minutes. The timer runs for 30 minutes regardless of

other functions in use (jets, temperature, or light).

You can manually cancel the timer by pressing the

TEMP- pad and then the LIGHT pad.

PAGE 40

THE QUEST, DESTINY, REWARD, ESCAPE,

AND EUPHORIA

–

LIGHT

JET

TEMP-

spa control operation

MARQUIS SPAS