Owner`s manual

maintenance
PAGE 65
AS NEEDED MAINTENANCE
1. Cover Care
It is recommended that you use Cover Cleaner to
keep the DuraCover™ clean and conditioned.
Proper care of the cover increases the life and
keeps it looking great in even the harshest condi-
tions. NOTE: Do not use regular household prod-
ucts or products that contain silicone, alcohol, steel
wool, or bleach.
2. DuraWood Care
Clean the exterior of the spa with a mild soap and
water solution. Cleaners that contain alcohol or high
levels of solvents, along with Acetone, Nitroben-
zene, and Cyclohexanol, can dissolve and discolor
the DuraWood exterior.
3. Excess Debris
Grit and debris tracked into the spa should be
removed with a spa vacuum.
4. Water Line
To avoid buildup of oils and lotions at the water line,
clean the interior when needed. We suggest the
Glove Sponge to clean without scratching.
NOTE: Do not use the same brush or sponge to
clean the exterior of the spa and the interior of the
spa. Soap and other product residue used on the
outside of the spa can cause foaming of the spa
water and scratches to the spa surface if used on
the inside of the spa.
5. Light Bulb Replacement:
A. Turn off the power to the spa.
B. Remove the equipment area door to find the
light access. (See EQUIPMENT DIAGRAM.)
C. Remove the lamp socket from the back of the
light assembly by turning counterclockwise and
pulling at the same time.
D. Gently pull the bulb out of the lamp socket and
replace it with a 6 watt bulb only (GE #918)
available from your spa dealer.
E. Install the lamp socket back into the light
assembly and replace door.
MARQUIS SPAS
Remove lamp socket
from back of light
assembly.