Owner`s manual

IMPORTANT CHEMICAL SAFETY
PROCEDURES
1. Always keep chemicals out of reach of children.
2. Read product labels carefully prior to use.
3. When dissolving, always add chemicals to water,
do not add water to chemicals. Some dry chemicals
should be dissolved prior to adding them to the spa.
Using a clean container, dip some water from the
spa. Mix until dissolved, then add to circulating water.
4. CAUTION: Do not mix chemicals together. Add
them separately to the spa water.
5. All chemical products should be stored in a cool,
dry, well-ventilated area where the average tem-
perature does not exceed 90°F (32°C). Keep
storage area clean of debris such as rags, newspa-
per, and combustible materials.
6. Keep chemicals away from open flame or other
heat source. Do not smoke near chemicals. If a dry
chlorine chemical fire should occur, use water only.
Do not use a dry chemical fire extinguisher to
attempt to put out the fire.
7. When adding chemicals, always keep the water
circulating in the spa with jets in a downward circular
pattern for better chemical distribution. Add chemi-
cals to the spa water one at a time. Allow several
minutes between any new chemical additions
using the jet action to evenly distribute throughout
the spa.
8. After adding chemicals, wait the amount of time
recommended on the chemical container
before retesting your water for an accurate
reading. Retest your spa water before using.
9. If you have any questions or concerns about the
correct procedures for handling chemicals, please
contact your authorized spa dealer or Marquis Corp.
marquis care and enjoyment guide
PAGE 48
MARQUIS SPAS