Owner`s manual

PUMP PRIMING (Pr)
Pump priming feature begins at start-up. When your spa
is energized, the LCD window displays a “Pr” message.
This mode lasts approximately four to five minutes, if not
exited manually by pressing the TEMP+ pad.
UNDERWATER AND ENTRYWAY LIGHTS
Press the SPA LIGHT pad to turn the underwater
and Entryway lights on and off. The icon appears in
the lower center of the display when the light is on.
The low-voltage system produces a night light for
evening use. After being on for 60 minutes, the
lights automatically turn off.
AQUA AMBIANCE™
Use SPA LIGHT pad. Step one: turn on light. Step two:
turn off and then on within 2-3 seconds.
WATERFALL LIGHT
Press WATERFALL LIGHT pad to turn on the Waterfall
light. The Waterfall light operates the same as the
Aqua Ambiance light. The icon appears in the lower
right of the display when the light is on.
WATERFALL FEATURE
The Waterfall feature and Convenience Center
attaches securely to the dual Vortex skimmer tops.
The water flow is controlled by an independent valve.
NOTE: Don’t remove the waterfall top while the
pumps are running.
SOAK TIMER
The soak timer starts the first time you press the
TIMER pad. The LCD window displays “E” for the
elapsed time followed by time in minutes (“00, 01,
02”, etc.). A second press of the TIMER pad will exit
the timer mode. The timer display and the current
temperature display will alternate every 10 seconds.
PAGE 33
DESTINY, REWARD AND EPIC
spa control operation
MARQUIS SPAS
Pr