Owner`s manual

SYSTEM LOCK
Once you find and establish the settings that work best
for your individual needs, use system lock to keep from
inadvertently changing the settings.
Press the TEMP+- pad and then immediately press the
SETTING pad. Unlock by repeating sequence. While the
system is locked, you may still operate the jets and light.
The LCD window displays LC to indicate the system is
locked when you try to change the temperature or
settings.
REMOTE CONTROLS
Underwater and Entryway lights
Press the LIGHT pad to turn the underwater and
Entryway lights on and off. The low-voltage system
produces a night light for evening use and makes
entering and exiting the spa safer. After being on for
60 minutes, the lights automatically turn off.
Jets
First press of the JETS pad activates pump on low-
speed (and starts soak timer). Second press of the
JETS pad activates pump on high-speed. Third press
of the JETS pad turns jets off for all-quiet mode.
Fourth press of the JETS pad turns pump back to
low-speed. If the pump is already on low (heating,
filter cycle) then the first press starts the soak timer.
After running on low- or high-speed for 15 minutes,
the pump automatically turns off (unless in heating or
filtering cycle).
NOTE: During times of inactivity floating remotes
should always be stored in the cup holder on the lip
of the spa. By storing the floating remote out of water
it will be less susceptible to water intrusion, a situation
that can occur after extended water exposure. More
often water intrusion occurs when spa owners
attempt to replace the batteries in their remote and
then do not properly reseal it. Battery replacement
should only be attempted by spa care professionals.
Dolphin Remote spa functions
Use the Light and Jets pads to control spa functions.
Dolphin Remote Soundsations™ operation
(See SPA CONTROL OPERATION, Remote Controls.)
spa control operation
PAGE 32
MARQUIS SPAS