Certificate

2713 w/wo Code R204
15.1 20.4 DC - 6K 65 1/1 -/- 5, 8, 9, Note A2
2716 w/wo Code R205
20 36 DC - 6K 65 1/1 -/- Note A2
2716 w/wo Code R221
28 36 DC R 6K 65 1/1 -/A Note A2
2725 w/wo Code R198
25 12-24 DC - 6K 65 1/1 -/- 5, 9, Note A2
2725 w/wo Code R203
22 12-24 DC - 6K 65 1/1 -/- 5, 9, Note A2
2725 w/wo suff, Code R212
20.1 7.2-24 DC - 6K 65 1/1 -/A 5, 8, Note A2
2731 w/wo Code R196
25 7.2-20 DC - 6K 65 1/1 -/- Note A2
2731 w/wo Code R201
20 7.2-20 DC - 6K 65 1/1 -/- 5, 8, 9, Note A2
2731 w/wo Code R204
15.1 20.4 DC - 6K 65 1/1 -/- 5, 8, 9, Note A2
2755 w/wo Code R207
18 9.6-18 DC - 6K 65 1/1 -/- 5, 8, 9, Note A2
4021 w/wo Code R48, w/wo suffix .0000 thru .9999
10 125 60 GP 6K 50 2/2 -/- Note 1
5 250 60 GP 6K
5000 w/wo suffix 0000 thru 9999, w/wo rating Code R3, f/b 1 thru 999
4 125 60 GP 6K 65 1/1 -/- -
2 250 60 GP 6K
- 125-250 60 1/10hp 6K
61 f/b 00 thru 99, ww/o P, B or 0/0
15 24 DC R 6K 50 1/1 -/- 7, Notes 3,6,9,10
Steering Electronic Unit Cat. No. 2074
- - - GP - - - -/- 5
Torque Adjustment Unit Cat. No. 2075
- - - GP - - - -/- 5
(a) - Temperature is 85 C for suffix N-N
(b) - Temperature is 105 C for suffix T105
(c) - These switches are SPST switches
(d) - These switches are SPDT switches
(e) - These switches are DPST switches
(f) - These switches are DPDT switches
(g) - These switches are SPTT switches
(h) - These switches are DPTT switches
*(a) - UL61058-1 - This is a tool switch with mechanical contacts and optional internal potentiometer, it does not contain a Solid State Switching
device (tested mechanical only).
*(b) - UL61058-1 - This is a tool switch with mechanical contacts werial and parallel to the Solid State Switching Devce (SSD). Tested mechanical
and electronically. Endurance was tested with simulated load, Heating test for the SSD was conducted based on the declared thermal current.
*(c) - UL61058-1 - This is a tool switch with mechanical contacts werial to the solid state.
*D1 - UL61058-1 - Switches with momentary contact.
*E1 - UL61058-1 - The declared thermal current is 19A.
*E2 - UL61058-1 - Heating Test for other parts has only been conducted for a duty cycle S3 with N/R=N/R=0.65, where N-13 minutes and R=20
minutes is.
Page 3
6
of 38WOYR2.E41791 - Switches, Appliance and Special Use - Component
21.10.201
4
http://database.ul.com/cg
i
-
b
in/XYV/template/LISEXT/1FRAME/showpage.html?na
m
...