Certifications

ANNEX TO ENEC CERTIFICATE 71-106704 page 7 of 8
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T [phone] F [phone] www.dekra-certification.com Company registration 09085396
Additional information
Additional tests according to Clause 30 of the following standards are performed with positive results for
switches marked with the letter “G” on the switch or the label of the smallest shipping container.
- IEC 60335-1:2010
- EN 60335-1:2002
Resistance to heat and fire: Insulation material around connections within an area of 3,0 mm.
- Glow-wire test 750 °C; no flame.
- Glow-wire test 850 °C; flame, if any, extinguished within 30 seconds after removal of the glow-wire.
- Glow-wire Ignition Temperature ≥ 775 °C; tested on raw material plates with the thickness of
0,75 mm, 1,5 mm and 3,0 mm.
Models: 1800., 1803., 1804., 1806., 1811., 1812., 1813., 1814., 1821., 1822., 1823., 1824., 1883.
The contact material of the switches is Ag/Cu optional silver plated.
The contact material of the switches may also be manufactured with Ag/Ag.
Shape and color of actuating members and housings may vary.
Models: 1808., 1809., 1818., 1819., 1828., 1829.
The contact material of the switches is Ag/Cu (Ag/Cu version.)
The contact material for type 1808. may also be manufactered with Ag/Ag.
Models: 1801., 1802., 1805., 1881.
Ratings: 6(4) A - 250 V~, 5E4; 10(4) A - 250 V~, 1E4; 5/50 A - 250 V~, 1E4
rocker switches / contacts Ag/Cu
Ratings: 8(8) A - 250 V~, 5E4; 12(4) A - 250 V~, 1E4; 5/70 A - 250V~, 1E4
rocker switches / contacts Ag/Ag
Ratings: 6(4) A - 250 V~, 5E4; 10(4) A - 250 V~, 1E4
biased switches N.O. and N.C. / contacts Ag/Cu
Shape and color of actuating members and housings may vary.
Model: 1858.
The switch with the resistive and capacitive load 5/100 A is after the normal operation, additional
subjected to a slow speed test of 100 operating cycles with an actuating speed of 0,5 mm/sec.
The switch with the resistive and capacitive load 5/100 A does also comply with the clause 14.6 of the:
IEC 60065:2001 + A1:2005 + A2:2010
EN 60065:2002 + A1:2006 + A11:2008 + A2:2010
This certificate replaces certificate No. 2142185.01 which we herewith declare invalid.
Conclusion
The examination proved that all requirements were met.
Factory locations
Marquardt Automotive Tunisia S.A.R.L.
Lot 23/24
Zone Industrielle El Agba
2087 El Agba, Tunisia
Marquardt Switches (Shanghai) Co. Ltd.
No. 650 Qingda Road Pudong New Area
Heqing Industrial Zone
201201 Shanghai, China