Datasheet

SENSORS
MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHESSNAP-ACTION SWITCHES ROCKER SWITCHES
|
170
SERIES 1050 - SUBMINIATURE SNAP-ACTION SWITCHES
TO 10 (1.5) A 250 V AC
Mushroom-shaped actuator
45°
The mushroom-shaped actuator allows, in addition to the vertical actuation from
above, lateral approach from any direction. In such application cases, an angle
of < 45° is necessary on the actuating element (angle for versions with extended
overtravel on request). To keep the friction here to a minimum, we recommend
the use of materials with a low friction coefficient in relation to the material PA.
In addition, the surface of the actuating element should be free from valleys.
The mechanical life endurance depends on the material and surface properties
as well as on the form of the slide.
Switching positions
Standard actuator
TP
OP
FP
7.5
8.4
±0.3
9.3
Standard actuator and extended
overtravel
7
8.4
±0.3
9.3
TP
OP
FP
Mushroom-shaped actuator
9.1
9.9
±0.3
10.8
TP
OP
FP
Mushroom-shaped actuator and
extended overtravel
8.6
9.9
±0.3
10.8
TP
OP
FP
Mushroom-shaped actuator with
foam sealing ring
6.4
1.8
6.5
10.8
9.9
±0.3
9.3
TP
OP
FP