Operation Manual

GB-5
PREPARATION FOR USE
SPEAKER CONNECTION
Place the speakers in convenient locations on either side of the unit. Usually a
distance of five to eight feet between speakers provides the best stereo effect,
but this may vary depending on the size and acoustics of the room. Locate the
Right and Left Speaker jacks on the rear of the unit and connect the speakers
to these jacks.
CAUTION: Only connect the speakers which are supplied with the unit. The
use of any other or additional speakers may cause damage to the unit. Never
operate the unit without the speakers connected.
OPTIONAL CONNECTIONS
AUX IN JACK (REAR OF UNIT)
Insert one end of the audio cable (not included) into the LINE OUT jack on your
external audio unit and the other end into the AUX IN jack on the rear of this
unit. Press the AUX button, the unit will be in AUX IN mode.
HEADPHONES JACK
For private listening, connect 3.5mm (32 ohm) stereo headphones (not
included) to this jack. The speakers are automatically disconnected when the
headphone plug is inserted in the jack.