Operation Manual

GB 7
3. Custom Setup
item option
Description
Auto Play OFF
Photo
Select different mode to
display picture.
First Device SD CARD
AUTO SEL
Select the first device.
Default NO
YES
Select to or not to restore to
the factory default setting.
Troubleshooting guide
If you experience a problem with this unit, check the chart below before calling
for service. If you are unable to remedy a problem by following these hints,
consult your dealer or service center.
SYMPTOM CAUSE SOLUTION
Main unit, no power AC adapter is not
connected .
Connect AC adapter as
shown in section on
Power supply.
Alarm time is not set See section on Setting
and Activating alarm
time.
The alarm does not
function
Alarm is not activated See section on Setting
and Activating alarm
time.
SD or MMC is not
inserted.
Insert SD or MMC. Reader does not
function
No .txt format file in SD
or MMC
Resave the files on SD
or MMC in. Txt format.
Note:
When opening the folder of SD or MMC or its file stored in, read time may
exceed the normal time due to large folder or file.