Operation Manual

GB 3
Power supply
Insert the small end of the AC adapter into the USB jack, connect the other end
to a wall outlet.
Note:
z Remove both the DC plug and the USB plug to disconnect the AC
adapter when not in use.
z Only use the supplied AC adapter which has the following spec: USB 5V
Power on/off
1. Power on the unit automatically as soon as the power supplied.
2. Power off the unit when holding the button for a long time.
Setting/Activating alarm time
1. In main state ,press Ö or Õ to choose clock mode. Press MENU button
into the clock screen then press “set” button to choose “ ”.
2. Press Ö or Õ button to make the alarm activated or not. When alarm is
activated, “ ’” displays and flash. When alarm is not activated,
“ ”displays.
3. Press “set” button to flicker the field of “hour of alarm time”, press Ö or Õ
button to set hour.
4. Press “set” button to flicker the field of “minute of alarm time”, press Ö or
Õ button to set minute.
Switching off the alarm
During alarm call, press any button to switch off the alarm. Alarm will auto reset
daily.
Helpful hint:
z During alarm call, if no button be pressed, alarm call will last 5 minutes.
Using USB cable to connect the unit to PC
1. Insert one end of a USB cable to PC, the other end to the USB jack of the
unit, the unit will be powered on after 3 seconds, then display the
slideshow of the stored picture. Press button for the first time, the unit
will go into main menu interface, then press for the second time:
‘connecting PC, press MENU to exit’ will appear on the top of the LCD
screen.
2. Plug a SD/MMC card to SD/MMC card slot.
Helpful hint:
You can copy and delete the files in the SD/MMC card on the PC.