Operation Manual

GB 19
Method
Select ‘Source’ and press ‘
’ to confirm. Press ‘’ or ‘’ button to select
recording source (Microphone), and then press ‘
’ button to confirm.
When you selected ‘Encoder’ option, and press ‘
’ button to confirm the
‘Encoder’ menu. The screen will display as following:
IM ADPCM
MS ADPCM
PCM
Press ‘’ or ‘’ button to select encoder items, and press ‘
’ button to confirm
(IM ADPCM/MS ADPCM/PCM). Encoder setting option is for Microphone only.
Select ‘Channel’ option, and then press ‘
’ button to enter ‘Channel’ menu.
The screen will display “Mono”.
The default mode ‘Mono’ will display. Press ‘
’ button to confirm.
Select ‘Rate’ option, and then press ‘
’ button to enter ‘Rate’ menu. The screen
display will display” Rate” as following:
8000
11250
16000
22050
32000
44100
48000
Press‘’ or ‘’ button to select any specific rate (8000/11250/16000/22050/
32000/44100/48000). Press ‘
’ button to confirm.
The quality of recording depends on sampling rate. The higher the sampling
rate, the better quality will be achieved. However, it more memory.