Operation Manual

Page 8
 Options introduction:
 List of menus:
○ LCD set
The operation method according to.“Equalizer” Enactment
○ Language Setting
The operation method according to.“Equalizer” Enactment
○Turning off Setting
The operation method according to.“Equalizer” Enactment
○’Memory status’
You can check total memory space and the percentage of usage.
○’Firmware upgrade’
Use for upgrade player’s firmware.
Tips: Press Play can exit current menu quickly. The function is valid on all other menus.
Reading Documents
On main menu, press Next/Last choosing e-Document, press Mode to entry corresponding submenu:
● Select Folder: Select the root directory of flash disk.
Press Mode to entry ‘Select Folder’ interface, press Play to select a file.
Note: You do not need to select a folder if the file you want to read is in root directory.
● Push Next to choose ‘Read document’, then press Mode to confirm. While reading, press Next or Pre to scroll.
9、Using USB Disk
The player is also a standard USB disk. Supported by Windows98 (drivers needed), Windows 2K or above (no
need for drivers), Mac OS 10.3, Red hat Linux 8.0 or above.
The player supports USB power supply, can be used without battery when connected to PC. To entry, when on
在’waiting mode’ press Mode return to main menu and choose the operation you need.
This player supports Suspend mode.
When connected to PC, The player works on the three modes below:
(Backlight Time)
Screensaver setting
(Language) Choosing different languages
(Timing shut off)
Setting a count down time in minutes, the player will
shut off when time out.
(Contrast Setting) Setting display’s contrast
(Memory Status) Check memory space and usage status
(Firmware Ver.) Version of player’s firmware
(Exit) Exit from Setting interface