Operation Manual
4. SkIP ( ) /SKIP( )
button
2. Play/Pause button
1. To skip forward or backward through the tracks on
the disc, Press the SKIP( ) or SKIP( ) button.
2. To search forward or backward through the music
on a disc, Press and hold the SKIP( ) or SKIP( )
button.
NO.
Button Name
Operation
① Press the PLAY/PAUSE( ) button; playback will
start automatically and the play indicator will light.
② Press the PLAY/PAUSE( ) button again to pause
playback; the play indicator will blink.
C OPERATION OF REMOTE HANDSET
SPECIFICATIONS AND FEATURES
Power Supply :
Power : 12W
Display : 2 digit red LED
AC: 230V / 50Hz; DC: 12V (8 "C")
Consumption
Speaker : 3" x 2, 8 ohm 2W
Dimensions : 190(W) x 209(H) x 200(D) mm
Weight (approx) : 1.8 Kg (excluding batteries)
Specifications subject to change without notice.
D SPECIFICATIONS
3. Stop ( ) button
5. Repeat button
In play mode, to repeat a single track, press the
REPEAT button once, the PRT indicator will blink.
Press the SKIP( ) or SKIP( ) button to select the
specific track that you wish to repeat. To repeat all the
track on a disc continuously, Press the REPEAT button
all disc, the PRT indicator will stand still.
Press the stop( )button to stop the disc before it is
finished
8. Master Volume
control
1. Power button
Press the POWER button to turn the unit on,
Press the POWER button again to turn it off.
9. MIC Volume control
Adjust the MASTER VOLUME control as desired.
10. ECHO control
11. AVC (auto voice)
control
7. Balance control
Rotate the ECHO control clockwise to increase the
echo or counterclockwise to decrease the echo.
In karaoke mode, after rotating the AVC button, human
voice eliminate automatically while singing.
Rotating balance control button to adjust channel
balance. Rotating the R channel L volume reduce,
Rotating the L channel R volume reduce.
Adjust the MIC VOLUME control as desired.
6. Program button
With the power on and the unit in the stop mode,
Press PROG button; the PROG indicator will blink
and "1" will appear then "0" will blink in the display.
Use the SKIP( ) or SKIP( ) button to select the
first track to be programmed. Press the PROG
button again, The selected track has now been
programmed and counted as program 1. Repeatly
operate to program the other desired tracks in
sequence, up to 20 tracks.
GB-3 GB-4