Operation Manual

5
LISTENING TO COMPACT DISC
NORMAL PLAYBACK
1. Set the FUNCTION selector to CD position.
2. Open the CD COMPARTMENT DOOR and place a CD on the center spindle
with the printed label side facing up.
3. Close the CD door. The disc will spin momentarily and “” will appear in the
display. Then the disc will stop spinning and the display will show the total tracks
on the disc.
4. Press the PLAY / PAUSE
button to begin playback. The PLAY indicator will
appear in display and playback begins from track 1.
5. Adjust the volume controls as desired.
6. Playback continues until all tracks have been played, then the disc stops and
the display again shows the total number of tracks on the disc. You may also
stop the disc at any time by pressing the STOP  button.
7.Open the CD door, remove your disc from the player, and set the FUNCTION
selector to the “OFF” position.
PAUSE CONTROL
The PAUSE control allows you to pause playback of a disc temporarily, and then
resume playback from the same point. Press the PLAY / PAUSE
button during
playback to activate the PAUSE control. Press the PLAY / PAUSE
button again
to cancel PAUSE and resume normal playback. The PLAY indicator stops flashing.
NOTE: Remember that the disc continues to spin in the pause mode even
though no sound is heard. Don’t forget to release the pause mode to
prevent excessive wear on the motor, and to save your batteries.
SKIP / SEARCH  /  BUTTONS
Press the SKIP / SEARCH  FWD button once during playback to skip to the
beginning of the next track. Continue to press this button to skip forward to choose
next available tracks until you reach the desired track.
Press the SKIP / SEARCH  REV button once during playback to skip to the
beginning of the current track. Press twice to skip back to the beginning of the
previous track. Continue to press this button to skip backward to choose previous
available tracks until you reach the desired track.
Hold the SKIP / SEARCH  FWD or  REV buttons during playback to rapidly
search forward or backward through the disc to locate a specific passage within a
track that you wish to bypass or to hear again.
High speed search continues as long as the SKIP / SEARCH  /  buttons are
pressed. Normal playback resumes when the SKIP / SEARCH  /  buttons are
released.
NOTE: During high speed music search the playback volume is automatically
reduced.
To begin playback of a disc on a specific track, wait until the player reads the disc
and displays the total track number, the desired track number is on the display.
Press the PLAY / PAUSE
button to begin playback on that track.
REPEAT PLAYBACK
This function allows you to repeat either a single track or the entire disc
continuously. To repeat a single track, select the track you wish to repeat and
begin playback on that track. Then press the REPEAT button once. The REPEAT
indicator start flashing and the selected track will be repeated continuously until
6