Operation Manual

GB - 3
PROGRAMMING TRACKS
 You can program up to 20 tracks in any order.
 Select the CD/MP3/USB Mode function.
 Press the PROG button.
 Press the SKIP Up/Down button or the FOLDER |<< / >>| buttons to select the track or folder number that you wish to add to your programming.
 Once you have selected the track of your choice, press the PROG button.
 Repeat steps 2 to 4 to add more tracks.
 Once all of the tracks you wish to hear have been programmed, press the PLAY/PAUSE button to start playing the programmed selection. Play
starts from the beginning of the first track programmed.
The programming stored in memory is cleared when you select the Radio function or when you switch off the unit.
MODE BUTTON (IN USB AND MP3 MODES)
To repeat one or all tracks, press the MODE button before or during play. Press the MODE button once to repeat only the track currently being played,
press this same button twice to repeat the entire CD and three times to select the Random mode. Press this button once again to return to the normal
mode.
REPEAT ONE REPEAT ALBUM REPEAT ALL RANDOM REPEAT OFF
USB AND SD/MMC SOCKET FUNCTION
 Select the CD/MP3/USB Mode function.
 Press the CD/USB button to change to the USB or SD/MMC mode.
 The display shows the total number of tracks present on the media connected to the USB port or SD/MMC port.
 Press the Play button to start playing the first track.
 Press the CD/USB button again and change back to CD mode.
SPECIFICATIONS
 Mains supply: 230V AC - 50Hz
 Radio bands: AM, FM (stereo)
 Frequency range: FM 88 – 108MHz
AM 540 – 1600kHz
 Speakers: 4 ohms 3-5W x 2
 Output power: 2 x 2W RMS, 10% THD (2 x 4W music)
 Headphone
impedance:
32 ohms