Operation Manual

Destinator 29
4 - Settings
Prompts
You can select the types of voice and visual notifications that you would like to use while
navigating. From the Settings menu, tap the Prompts button. The Prompts screen appears.
Voice Prompts
Speed Warning
Warns you when your car exceeds the speed limit. This prompt is not active by
default.
Route Recalculation
Activated when Destinator recalculates a new route. This prompt is not active by
default.
Unreliable GPS Signal
Warns that the GPS signal is too low and unreliable for navigation. This prompt is
automatically active by default.
GPS Not Found
Alerts you if the GPS signal is lost, or if the power is removed from the GPS
receiver.
Drive Carefully
Reminder at the start of each journey. This prompt is automatically active by
default.
Visual Prompts
Text
Directions are displayed as text.
Symbols
Directions are displayed as symbols.
None
Directions are not displayed.
Language Settings
lets you select the language for announcing travel prompts, street names, and driving
directions.
GPS Settings
Destinator uses the GPS receiver to pinpoint your location. GPS signals are automatically
acquired and your vehicle's location and position are constantly updated unless you are
working in the Free Browse Map mode or you tap the GPS Off button. The GPS receiver may
take a few minutes to find its initial location. For best results, ensure that the GPS receiver has
a clear view of the sky.
The following GPS information is displayed:
 Longitude - The angular distance east or west on the earth's surface.
 Latitude - The location of a place north or south of the earth's surface.
 Speed - The rate of movement, as expressed by kilometres or miles per hour.
 Altitude - The height above sea level.