Operation Manual

Destinator 25
Search for a Location
Units of Measure
You can tap the Units of Measure
button to specify the measurement system you would like
to use.
You can select:
o Miles/Yards
o Miles, 10
th
of a Mile
o Kilometres, Metres
Map Settings
You can tap the Map Settings button to customize your map display, as shown in the figure
below.
The following map settings are:
Map Orientation
Forward is up – This option orients the map so that your forward direction is
always at the top.
North is up – This option orients the map so that North is always at the top.
Use Automatic Zoom
When this option is selected, the zoom is speed dependent. The map zooms
out at higher speeds, displaying a larger map area, and zooms in at slower
speeds, displaying a smaller map area. If you manually change the zoom,
the Automatic Zoom returns to a system defined zoom level after several
seconds of inactivity.
Use Larger Labels
This option increases the size of street names to make the map easier to
read.
Day/Night Mode Auto
Switch
This option lets you switch the map view for either day or night driving
automatically
Extras
From the Options menu, tap the Extras button, to display the Destinator add-ons as described in the sections
below.
Multistop Planner
The Multistop Planner lets you plan a route with up to twelve stops.
When you tap the GO button, the route is calculated in stages, from the departure point to the
first stop. When you reach the first stop, the route recalculates to the second stop, and so on.