Operation Manual

77
2424
1.10 Description of the Wires Connection
1.9 Description of the Rear Cabinet
Connecting the parking brake line to the parking brake system built in the car
Parking brake
Parking brake switch
(inside the car)
Parking brake line(light blue)
To metallic body or chassis of the car
Note: after connecting Parking Brake Line, the video will be display on the small monitor of the front panel only after braking car
BLUE
GRAY
BLACK
Antenna
BLACK
SOCKET
WIRING CONNECTING
DVD audio RCA out(works only when DUAL ON)
Rear View Camera (optional)
Video out
Parking Line
WHITE
RED
BLACK
BLACK
Reversal line(optional)
View Mode
This setup item is for selecting the different video vision mode on the screen.
There are 4 modes to select: Fill, Original, Auto Fit, Pan Scan.
JPG View
This setup item is for selecting the different JPG vision mode on the screen
3) Language Video Audio Rating
Digital Output
DRC
Down Sampling
Digital Output(option)
It is for selecting your desired digital audio output mode.
PCM: When you use the output interface of the coaxial or optical to
connect the amplifier with the function of 2 channels of digital stereo,
choose the item.
When playing a disc recorded with the recording system of Dolby or MPEG,
The output interface of the coaxial or optical will output the digital audio
signal in 2 channels of way modulated by PMC.
RAW: When you use the output interface of the coaxial or optical to
connect the amplifier with the function of decoding Dolby, DTS or MPEG ,
choose the item.
When playing a disc recorded with the recording system of Dolby, DTS or
MPEG, The output interface of the coaxial or optical will output the corres-
pondingly digital audio signal in original sound code format.
OFF: if you choose the item, the output interface of the coaxial or optical will
not output audio signal. if there is not an amplifier, you should set it OFF
mode. Otherwise, in AV mode, it can not output any sound.
DRC
It is used to adjust the linear compression ratio. If you set it to be FULL, the
Peak-to-Peak value of the audio signal is the minimum; if you set it to be OFF,
the Peak-to-Peak value is the maximum.
Down Sampling
It is used to turn on or off the Down Sampling mode.
OFF: Increase the speed of resampling, but the quality is poorer.
ON: Need more time to resample, but the quality is better.
BLACK
YELLOW
YELLOW
WHITE
1.10 Description of the Input/Output Wires
YELLOW
MEMORY B+
BLACK(GND)
IGNITION SWITCH
BLUE AUTO ANT
YELLOW
WOOFER LINE OUT(optional)
RED
FRONT
REAR
RIGHT
SP
FRONT
WHITE
WHITE / BLACK
GREEN / BLACK
VIOLET / BLACK
GRAY / BLACK
GRAY
VIOLETGREEN
REAR
LEFT
SP
++
++
++
++
NOTE: In spite of having any kinds of speaker system, must use 4 ohms
impedance of speaker to reduce the distortion during high volume level.
RED R
WHITE L
RCA LINE OUT
FUSED
FILTER
BOX 1A
& 15A
FUSES
WIRING CONNECTING SOCKET
WIRING CONNECTING PLUG
ISO CONNECTOR