Operation Manual

1717
1414
5. PTY (PROGRAM TYPE) BUTTON
Press PTY button shortly to turn on/off the PTY list. The list displays as follows:
After turning on the PTY list, press one of 6 number buttons(1~6) to select a
desired PTY item, then it will search corresponding PTY information, and stops
if the corresponding PTY information is detected. If corresponding PTY informa-
tion is not existed any more, it will display PTY NONE and PTY engaging is auto-
matically exit to normal mode.
6. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed short, AF switching mode is selected and the state of AF
switching mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information
is not received yet.
When AF switching mode is selected, the radio checks the signal strength of
AF all the time. The interval of checking time of each AFs depends on the
signal strength of current station, from a few minute for strong station to a few
seconds for weak station. Every time that new AF is stronger than current
station, it switches over to that frequency for very short time, and NEW
FREQUENCY is displayed for 1-2 second. Because the mute time of AF
switching or checking time is very short, it is almost inaudible in case of
normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function
can only receive and save RDS program.
7. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press TA button to turn on/off TA search mode.
When TA search mode is on and a traffic announcement is transmitted,the unit will:
1)Switch automatically from any audio mode to the traffic announcement;
2)Switch on the traffic announcement automatically when the receiver is in a
waiting reception mode and the audio signal is muted;
3)Switch from a program to another one carrying a traffic announcement on the
enhanced other networks, according to possibilities available through EON.
4)TA, TP will be displayed on LCD.
5)If the volume level is under the threshold point, it will e raised to the threshold point.
* When the traffic announcement is over, the previous mode will be restored.
* TA interruption function:
The current traffic announcement is cancelled by pressing TA button. But the TA
search mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or
saved only when traffic program identification code has been received.
(<41>PTY)
(<15>AF)
(<16>TA)
1.POP M 1.JAZZ 1.NEWS 1.CULTURE 1.SOCIAL
2.ROCK M 2.COUNTRY 2.AFFAIRS 2.SCIENCE 2.RELIGION
3.EASY M 3.NATION M 3.INFO 3.VARIED 3.PHONE IN
4.LIGHT M 4.OLDIES 4.SPORT 4.WEATHER 4.TRAVEL
5.CLASSICS 5.FOLK 5.EDUCATE 5.FINANCE 5.LEISURE
6.OTHER M 6.DRAMA 6.CHILDREN 6.DOCUMENT
4.6 Select Chapter/Track with the Root/PBC Menu
In the state of DVD disc playing
1. Press the TITLE button on the remote controller to display the title list.
2. Press the direction buttons to select your desired title, and then press the OK
or ENTER button to open the root menu of the selected title.
3. Press the direction buttons to select your desired chapter, finally press the
OK or ENTER button to play the selected chapter.
During playback, long pressing the MENU button can directly display the root
menu of the title that is playing.
In VCD mode
1. When starting to turn on the PBC function, it will play from the beginning of
the disc till it display the PBC menu on TV screen if the disc include the PBC
menu.
2. Press the number buttons to select your desired track to play. During play-
back, the number buttons are not available.
In MP3/WMA mode
1. The root menu is displayed on TV all the time(and the TITLE or PBC button
is not available).
2. Press the direction buttons to select your desired file, then press the OK or
ENTER button to play the selected file.
In CD mode, the TITLE, PBC buttons are disabled.
Under the state of closing the front panel, press the EJECT or OPEN button
to slide down the front panel, then the disc in the disc compartment will come
out automatically.
5. Advanced Disc and SD Card Operation
5.1 Playback with Speed
During normal playback, press >>/<< button continuously to fast play
forwards or backwards at the speeds such as x2, x4, x8, x20.
During speed playback, press PLAY button to resume normal playback.
4.7 Terminate the Playback
1.
and then take away the disc.
2. Long press the STANDBY button to turn off the DVD player.
(<14>EJECT/OPEN)
(<7><8> >>;<<)