Operation Manual

1212
1919
MASK DPI/MASK ALL:
MASK DPI mode: masked only the AF which has different PI.
MASK ALL mode: masked the AF which has different PI and NO RDS signal with high
field strength.
EONTA LOCAL/EONTA DISTANCE:
EONTA LOCAL mode: When the filed strength level of EON linked is less than the
threshold level, the radio does not switch that station, and a customer can hardly
listen to any disturbances. When EONTA LOCAL mode is selected, EONTA LO on
numeric display is indicated for a few seconds.
EONTA DISTANCE mode: EON TA switching is try to implemented by the information
of current station. When EONTA DISTANCE mode is selected, EONTA DX on numeric
display is indicated for a few seconds.
REGION ON/OFF:
REGION ON: AF switching or PI SEEK is implemented to the station which have
all PI codes are the same as current station. REG of individual segment is turned
on also together with displaying REG ON on numeric display for a few seconds.
REGION OFF: The regional code in the format of PI code is ignored when AF
switching or PI SEEK is implemented. REG of individual segment is turned off
together with displaying REG OFF on numeric display for a few seconds.
TA VOL--- 15 will be displayed by default. To rotate the VOL knob to adjust the TA
VOL value such as: 0<--> . When TA function is activated, if a TA program is
tuned in at the volume level set regardless of the volume of the other source at the
time.(note: when the unit tuned into a TA program, the volume level increase/
decrease gradually from the system volume)
(5) EXPERT
DX
STEREO
BEEP
LOUD
SUBWOOFER
BACKLIGHT
REAR CAM
OSD COLOR
DX: It is used to select the DISTANCE or LOCAL mode when searching the radio
station for FM band.
STEREO: It is used to select the STEREO or MONO mode for FM band.
BEEP: It is used to select the BEEP mode about pressing buttons.
LOUD: It is used to turn on or off the LOUD mode.
SUBWOOFER: It is used to turn on or off the SUBWOOFER output.
BACKLIGHT: It is used to select a preset backlight value of the small monitor on
the front panel.
REAR CAM: It is used to select the MIRROR or NORMAL mode of the rear camera.
OSD COLOR: It is used to select a preset value of the background color of the screen.
(6) CLOCK
CLOCK
CLOCK ADJUST
CLOCK: It is used to turn on or off the clock time displayed on the monitor of the
front panel.
CLOCK ADJUST: It is used to adjust the clock time displayed on the monitor of the
front panel .
3) To adjust or select a sub-item for the selected menu item, rotate the VOL knob.
4) After setting the selected menu item(s), press MENU button again to exit the
MENU setting page.
50
by rotating the VOL knob
5.4.2 A-B Repeat
Press A-B button if you want to repeat a specific segment on a disc that
you define:
1. Press A-B button at a point (A) where you want it to be the start point of
the repeat segment. Press A-B button again at a point (B) where you want
it to be the terminal point of the repeat segment. Then it will play the seg-
ment repeatedly.
2. To cancel A-B repeat mode and resume normal playback, press A-B button
for the third time.
5.5 Playback in Random
In the state of DVD/VCD/MP3/WMA/CD disc playing, press the RDM button
to switch between RANDOM ON/OFF. When in RANDOM ON mode, it will
play in random.
5.6 View the Video in Different Angle
1. In the state of VCD/MP3/WMA/CD disc playing, the ANGLE button on the
IR remote controller is not available.
2. In the state of DVD disc playing, press the ANGLE button repeatedly on
the IR remote controller to view in different angle.(This function is only
for the DVD discs with ANGLE function)
5.7 Zoom the Video
Under DVD/VCD mode, during playback, long press the ZOOM button
continuously to enlarge a certain area of the images with these multiples:
Q1, Q 2, Q 3, Q 4(only for DVD) Q OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
(<31>A-B)
(<6>RDM)
(<38>ANGLE)
(<31>ZOOM)
Note:
1) No A-B repeat function for WMA playback.
2) During CD/VCD/SVCD/MP3 playback, points A and B must be
within the same track.
During DVD playback, points A and B can be selected from different
chapters.