Operation Manual

※
LOUD --- click to switch loudness on or off.
※
AMS --- click to start automatic memory storing/prog
ram scanning function.

Automatic Memory Storing
Press and hold
AMS
button on remote control about several seconds or
hold press AMS icon on the
screen, the radio searches from the current frequen
cy and checks the signal strength until one cycle
search is finished. And then stations are stored in
to the preset number button in turn according to th
e
strength of the stations. When auto seek is finishe
d, it will enter into preset scan mode automaticall
y.

Program Scanning
Shortly press
AMS
button on the remote control or click AMS icon on
the screen to scan all station
presets saved in memory. And it will hold at each s
tation for several seconds.
※
STATION STORING
The preset
buttons (numeric buttons 1~6) on remote control and
M1~M6 frequency bar displayed on
right zone of the touch screen can be used to store
6 stations in each band for convenient access to
your favorite stations. The stations might be FM1,
FM2, FM3, AM1 (MW1), AM2 (MW2) band. The
operation is as below:

Programming stations
1.
Select the desired band, then tune in the station y
ou want to store in memory.
2.
Press and hold one of the preset buttons or M1~M6 f
requency bar for several seconds, the
current station will be stored to the location butt
on. Repeat steps 1. and 2. to program
additional stations.

Quick tuning
Select the desired band, then press one of the six
preset buttons on remote control or tap M1~M6
frequency bar displayed on screen will retrieve the
corresponding station which had been stored in
the memory.
※
MONO/STEREO
You can press
ST
button on remote control or click ST icon on the s
creen to select mono or stereo
mode. You can sometimes improve reception of distan
t stations by selecting mono operation.
※
LOCAL/DISTANCE
Press
LOC
button on the remote control or click LOC icon on t
he radio menu to select between local
and distant stations.
Local setting for reception of strong station, and
a distant setting for reception of weaker stations.
When search station in local mode, if there is no s
tation available, it will switch to distant mode an
d
search station automatically. If there is no statio
n available, it will stop searching and return to l
ocal
mode.
When search station in distant mode, if there is no station available, it will stop searching in distant
mode.
※
EQUALIZATION
EQ--- click it to change the equalization mode, suc
h as ROCK, JAZZ, CLAS and OFF.
MENU OPERATION
19