Operation Manual

BASIC OPERATION
TURNING ON/OFF THE UNIT
Press
button on the front panel or on the remote control to turn the unit on. When th
e unit is on,
press
button on the front panel for several seconds or p
ress
on the remote control will turn the unit
off.
MONITOR PANEL ANGLE ADJUST
Press
OPEN
button on the front panel to draw out the monitor
then press
OPEN
again to draw in the monitor
to normal position.
When the monitor drawing out, the front monitor can be turn down or turn up to some degree by using
/
buttons on the front panel.
NOTE:
The monitor is operated automatically. Do not draw
the monitor out or turn it upward or downward
manually. Otherwise, the mechanism construction may
be harmed to some degree.
SOUND ADJUSTMENT
Repeatedly press the volume button on the front pan
el of the unit or
SEL
on the remote control to select the
desired adjustment mode. The adjustment mode will c
hange in the following order:
VOL BAS TRE BAL FAD BRI
CON COL
(volume bass treble balance fade br
ightness contrast color)
After selecting your desired mode, you can adjust the current mode being displayed by using the volume
knob on the front panel or
VOL+/VOL-
buttons on the remote control. Note: When P-EQ mo
de is activated
(not in EQ OFF mode), press the volume knob on the
unit or
SEL
button on the remote control to select the
modes. And Bass /Treble modes are invalid. (Shown a
s below)
VOL BAL FAD BRI CON
COL
Note when the monitor is drawing in, press
SEL
button, the BRI, CON, and COL three items can’t be
selected
and adjusted.
REMOTE SENSOR
There is a remote sensor on the front panel. You can point the remote control to the remote sensor and press
functions keys on the remote control to control the
unit.
Note to operate it within the certain operation ang
le.
16