Operation Manual

※
APS--- click to start automatic memory storing/prog
ram scanning function.
- Automatic memory storing
Press and hold
AMS
button on remote control or
APS
icon about several seconds, the radio searches
from the current frequency and checks the signal strength until one cycle search is finished. And then
stations are stored into the preset number button i
n turn according to the strength of the stations. W
hen
auto seek is finished, it will enter into preset sc
an mode automatically.
- Program scanning
Shortly press
AMS
button or
APS
icon to scan all station presets saved in memory.
And it will hold at
each station for several seconds.
※
STATION STORING
The preset
buttons (numeric buttons 1~6) on remote control and
M1
~
M6
bar displayed on touch screen
can be used to store 6 stations in each band for co
nvenient access to your favorite stations. The stat
ions
might be FM1, FM2, FM3, AM1 (MW1), AM2 (MW2) band. The operation is as below:

Programming stations
1.
Select the desired band, then tune in the station y
ou want to store in memory.
2.
Press and hold one of the preset buttons or
M1
~
M6
bar for several seconds, the current station
will be stored to the location button. Repeat steps
1. and 2. to program additional stations.
 Quick tuning
Select the desired band, then press one of the six
preset buttons on
remote control or tap
M1
~
M6
bar displayed on screen will retrieve the correspo
nding station which
had been stored in the memory.
※
MONO/STEREO
You can press
ST
button on remote control or click ST icon on the s
creen to select mono or stereo
mode. You can sometimes improve reception of distan
t stations by selecting mono operation.
※
LOCAL/DISTANCE
Press
LOC
button on the remote control or click LOC icon on t
he radio menu to select between local
and distant stations.
Local setting for reception of strong station, and
a distant setting for reception of weaker stations.
When search station in local mode, if there is no s
tation available, it will switch to distant mode an
d
search station automatically. If there is no statio
n available too it will stop searching and return t
o local
mode.
When search station in distant mode, if there is no
station available, it will stop searching in dista
nt
mode.
※
EQUALIZATION
EQ--- click to change the equalization mode, such a
s EQ OFF, POP, ROCK, CALS, JAZZ, FLAT and
VOCAL.
MENU OPERATION
19