Operation Manual

BASIC OPERATION

TURNING ON/OFF THE UNIT

Press button on the front panel or on the remote control to turn the unit on. When the unit is on, press

button on the front panel or on the remote control will turn the unit off.

PANEL RELEASE/REINSTALL/ANGLE ADJUST

To Release the Front Panel

Press the release button on the front panel, then the right-hand side of the panel will be ejected. Remove

the front panel by pulling its left-hand side outward. For safekeeping, you can store the front panel into the

case after being removed.

To Reinstall the Front Panel

Push the front panel into the main body from the left position then the right position. A ‘click’ sound should be

heard. Note to let the front panel lock in position properly.

To adjust the angle of the Front Panel

The front panel can be adjusted to the desired position to your need by using button on the front panel.

You can also press button to turn the front panel down to the normal position.

SOUND ADJUSTMENT

Repeatedly press SEL button on the front panel of the unit or on the remote control to select the desired

adjustment mode. The adjustment mode will change in the following order:

VOL BASS TREB BAL FADE BRI CONT COL

After selecting your desired mode, you can adjust the current mode being displayed by using +/- buttons on

the front panel or VOL+/VOL- buttons on the remote control. Note: When P-EQ mode is activated (not in

EQ OFF mode), press SEL button to select the modes. And Bass /Treble modes are invalid. (Shown as

below)

VOL BAL FADE BRI CONT COL

REMOTE SENSOR

There is a remote sensor IR on the front panel. You can point the remote control to the remote sensor and

press functions keys on the remote control to control the unit.

Note to operation it within the certain operation angle.

VOLUME LEVEL ADJUSTMENT

Pressing the volume +/- buttons on the front panel of the unit or VOL+/VOL- buttons on the remote control to

adjust the volume level. You can also adjust the volume level by tapping the volume bar displayed on the

screen.

MUTE FUNCTION

Pressing button on the front panel or on the remote control will mute the sound. Press it again will

resume the sound.