Operation Manual

21
◆
Setting Memory
Press radio preset buttons (numeric buttons 1~6)
on remote control or on the front panel to preset
stations at radio mode. Each band can store six
preset stations. The stations might be FM1, FM2,
FM3, MW1 (AM1) and MW2 (AM2) band. The
operation is as below:
1) Store in Memory
Press and hold desired radio preset buttons
(numeric buttons 1~6) on the remote control or
on the front panel for several seconds, the
current listening station will be stored into the
number button.
2) Retrieve a Preset Station
Press any one of the
radio preset buttons
(numeric buttons 1~6) on the remote control or
on the front panel to retrieve a station which had
been stored in the memory in advance and the
chosen frequency will be shown on display.
◆
Automatic memory storing & program
scanning
1) Program scanning
Shortly press
AMS
button on remote control to
scan preset station.
2) Automatic memory storing
Press and hold press
AMS
button on remote
control for about several seconds, the radio
searches from the current frequency and
checks the signal strength until one cycle
search is finished. And then stations are stored
into the preset number button in turn according
to the strength of the stations. When auto
search is finished, it will enter into preset scan
mode automatically.
Note:
Press and hold 1-6 numeric buttons on
the remote control for about several seconds,
will store the current station to the current
numeric key position.
◆
◆◆
◆
Mono/Stereo
Press ST button on remote control to select mono
or stereo mode. You can sometimes improve
reception of distant stations by selecting mono
operation.
◆ RDS (RADIO DATA SYSTEM) OPERATION
1) Setting AF function
In FM mode, Press and hold TA/AF button on
the front panel to switch on or off AF function.
In AF on mode, “AF” will flash on the screen.
2) In FM mode, shortly press
TA/AF
button on the
front panel to switch TA on or off. When TA on,
the unit will search Traffic Announcement
automatically.
When received a Traffic Announcement station,
the unit will change to the Traffic
Announcement station automatically. Shortly
press
TA/AF
again to exit TA mode.
3) Using
PTY
to Select Program
Press
PTY
button on the front panel to start the
station search:
POP M, ROCK, EASY M, LIGHT M, CLASSIC,
OTHER M, JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M, NEWS, AFFAIRS, INFO,
SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED,
WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE,
DOCUMENT.
Use
VOL+/-
buttons on the remote control or
volume knob
on the front panel to change the
items, when you choose the desired items.
When PTY is selected, the radio starts to
search corresponding PTY information, and
stops if the corresponding PTY information is
detected.
If corresponding PTY information is not existed
any more, PTY engaging is automatically exit
to normal mode.
Notes:
AF: Alternative Frequencies
Frequency list of broadcasting stations
transmitting the same program
TA: Traffic Announcement Identification
Identification data showing traffic information
is being transmitted or not
PTY: Program Type Code
Contents of programs such as news, light
music, sports etc.
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
OPERATION