Operation Manual

GB-9
DISC MAINTENANCE
Caring for discs (A)
Do not touch the shiny surface of the disc or bend the disc.
Never use solvents such as benzene or other strong chemical cleaners since these could
damage the unit's finish.
It is important that no liquid reaches the inside of the unit.
Remove the disc from the case by holding it at the edges while pressing the centre hole lightly.
Place the disc into the tray with the label facing up.
A dirty disc may not play correctly. If a disc becomes dirty, wipe it with a soft cloth in a straight
line from centre to edge.
Avoid exposure to direct sunlight, temperature extremes, and moisture.
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact
the shiny, unprinted side of the disc.