User Guide English
Introduction Box Contents Onset 120WW Gobo Holder User Guide Power Cable Gel Holder Safety & Warranty Manual DMX Cable Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit marqlighting.com. For additional product support, visit marqlighting.com/support.
Features Rear Panel 6 7 8 9 10 2 1 5 4 3 1. Power In: Use a standard power cable (included) to connect this input to a power outlet. 2. Fuse: This compartment holds the fuse. Before cleaning or replacing the fuse, disconnect Onset 120WW from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the fuse only with a new fuse with the same rating (250 V, 3 A). 3.
Setup Note: Items not listed under the Introduction > Box Contents are sold separately. Power Information Before connecting the fixture to a power outlet, make sure the power cable is not crimped or damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on its housing or decal). Before cleaning or replacing the fuse, disconnect Onset 120WW from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only).
Gobo Replacement Follow these steps to insert a gobo into the fixture. 1 2 Unscrew.
Linking When using multiple Onset 120WW fixtures, you can link (“daisy-chain”) them so that each each fixture supplies power and/or sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup time. You do not have to link fixtures for both power and DMX control; you can link them for either purpose independently.
Operation Menu Options To use the menu: 1. Press Menu to cycle through the available menus: DMX Mode, Dimmer, and Strobe. 2. Press Enter to select a menu. 3. Use the Up and Down buttons to change the currently shown setting. 4. Press Menu to confirm your choice. To adjust other settings, repeat Steps 1–4.
Technical Specifications Specifications are subject to change without notice. Light DMX Type LED Power 120 W Colors Warm white, 3200K Color Rendering Index 85 Gobo B-size with removable gobo holder Illuminance 2,600 lux @ 4 m (13.1 ft.
Lumen Output Lumens: 4025 2600 1090 600 385 26° Distance (m): 0 6 8 10 9.84 13.12 19.69 26.25 32.81 Diameter (m): 0 1.26 1.65 2.46 3.23 4.13 (ft): 0 4.13 5.41 8.07 10.6 13.55 (ft.
marqlighting.com Manual Version 1.