User Guide

20 MARQ Golfer
EN
2 Align the new hinged strap with the
watch.
3 Press the strap into place.
NOTE: Make sure the strap is
secure. The latch should close over
the watch pin.
Changing Integrated QuickFit
Accessories
1 Pull to open the latch, and remove
the integrated QuickFit strap or
bracelet from the watch.
2 Pull to open the latch on the
integrated strap or bracelet, and
align it with the watch.
3 Close the latch over the watch pin.
NOTE: Make sure the strap or
bracelet is secure. There should be
a small gap
① between the latch
and the strap or bracelet.
Charging the Device
WARNING
This device contains a lithium- ion
battery. See the Important Safety
and Product Information guide in the
previous pages for product warnings
and other important information.
NOTICE
To prevent corrosion, thoroughly
clean and dry the contacts and the
surrounding area before charging or
connecting to a computer. Refer to the
cleaning instructions in the owner’s
manual.