User manual

Linking

When using multiple Gesture Spot 300 fixtures, you can link (“daisy-chain”) them so that each each

fixture sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup

time.

DMX

Use a standard 3-pin DMX cable to connect the DMX Out of one fixture to the DMX In of another.

Your connected DMX controller will send its data to the fixtures in sequence. All fixtures in this chain

will receive all DMX data.

According to the DMX standard, you can link up to 32 fixtures with up to 300 feet (91 meters)

between each fixture, without amplification. Keep in mind the number of channels you are using as

well as the starting address.

Gesture Spot 300

DMX Controller