User manual

TWM4™
15
Input Address Sending* Operation
Brown B03 ON/OFF Send ON or OFF commands*
Red B04 ON/OFF Send ON or OFF commands*
Orange B05 ON/OFF Send ON or OFF commands*
Yellow B06 ON/OFF Send ON or OFF commands*
* Depends on the status of the switch actuator or address to be controlled
(toggle mode).
3.2 Sending dimming commands with 1-pole, normally open contact,
Momentary switch
Action Sending
Send address (2 x) A1...P16
Send set-up command (2 x) BRIGHT
Send set-up command for any options (2 x) All Lights ON, All Lights OFF, All Units OFF
Example of programming on address B03
Action No. of LED flashes
Send address B03 (2 x) 2 x
Send set-up command BRIGHT (2 x) 5 x
P
PROG.
N
L
TWM4
Figure 5.
PROG.
Brown
Blue
hoofdstuk 3.2
Brown
Red
Blue
hoofdstuk 3.3