User manual

© MARMITEK
16
Optional:
If the status of the module has to change with group commands All Lights On
and All Units Off.
Action No. of LED flashes
Send All Lights On (2 x) 2 x
Send All Units Off (2 x) 4 x
Result
• Dim function available for all inputs.
• Other inputs are automatically given consecutive addresses.
Input Address Sending* Operation
Brown B03 ON/OFF BRIGHT/
DIM
Short pulse (< 0.5 s) ON or OFF,
Long pulse (> 0.5 s) DIM or BRIGHT
Red B04 ON/OFF BRIGHT/
DIM
Short pulse (< 0.5 s) ON or OFF,
Long pulse (> 0.5 s) DIM or BRIGHT
Orange B05 ON/OFF BRIGHT/
DIM
Short pulse (< 0.5 s) ON or OFF,
Long pulse (> 0.5 s) DIM or BRIGHT
Yellow B06 ON/OFF BRIGHT/
DIM
Short pulse (< 0.5 s) ON or OFF,
Long pulse (> 0.5 s) DIM or BRIGHT
• Depends on the status of the switch actuator or address to be controlled
(toggle mode).
3.3 Sending dimming commands with Momentary switches with two
normally open contacts
Brown
Red
Blue