Specifications

Email your order to us at [e-mail]
8
Audio
Full Range Dual Cone
Bookshelf Speakers
High quality 4" dual cone, full range mini box speaker.
This 80 W Speaker has a Heavy Duty ABS Construction
and Quick Connect Speaker Terminals.
Specifications:
• Colour Black
• Dimensions (mm) 120x120x132
• Impedance (Ohms) 8
• Sensitivity (dB) 90
• Peak Music Power (W) 80
• Power RMS (W) 40
• Frequency Response (Hz) 80-20000
• Type Dual Core (Supplied as a pair)
BT12 Speaker Selector Switch
White 6.5" 2-Way In-Wall Speakers (8 Ohms 120 W)
High quality 6.5" 2-Way In-Wall speaker with directable
1" Titanium Dome Tweeter, supplied in pairs.
Features:
• Designed to allow the use of two pairs of speakers
with one amplifier
• Speaker selector switch to play either pair of speakers
or both at the same time
• Suitable for loudspeakers from 4ohms to 16ohms
• Screw terminals for strong connection and
minimal loss
• Strong, stylish metal casing
• Accepts loudspeaker cable up to 2.5mm diameter
• 150 watts RMS per channel rating
• Easy to use speaker switch
Code B406A black £18.99
Also available in White, order code B405A
Code BT12 £12.99
Code SA220 (Black finish) £98.96
Surround Anywhere 20 Wireless Support Kit
Connect your present home cinema rear speakers
wirelessly; no more loose cables in your living room.
Uncompressed digital transfer ensures sound that goes
beyond CD quality, without interference or delay. The
built-in amplifier in the receiver provides more than enough
power for your rear surround speakers. Automatic ON/OFF
function of both transmitter and receiver for trouble-free
use. The volume is adjusted with your own remote,
because the transmitter is directly connected to the speaker
output. Local volume on transmitter and receiver for the
correct balance between front- and rear speakers.
8-Way Loudspeaker Selector
This switcher unit allows the distribution of a stereo
amplifier. Simply connect the speaker output of an
amplifier to the box, this output can then be distributed to
up to eight different stereo speaker sets in eight different
locations, each speaker set can be individually activated via
the push buttons on the front of the box. Ideally suited for
buildings where an independent sound control is required
for different rooms or zones. Enables eight pairs of
speakers to be connected to a single stereo amplifier.
Specifications:
• Heavy duty push-buttons
• Built-in overload protection
• Spring clip terminals
• Designed for 4-16 ohms speakers
• Wiring Gauge 14 to 22 gauge
• Input 1 x stereo
• Output 8 x stereo
• Power per channel 100W max
• Dimensions 432 x 125 x 55mm
• Weight 2.08kg
Code
8WLS £29.99