Specifications

Find product information and data sheets on www.keene.co.uk
35
Wireless HDMI
Gigavideo 821 Wireless HDMI Sender
At last, a cable free solution for HDMI. The transmitter has
two HDMI inputs and includes a local HDMI pass-through
output so you can still view the sources locally. Switch
between any of the two inputs and watch the output
cable free at a distance of up to 30m (clear line of sight,
or typically 15m through walls). The signal is
uncompressed so the output will stay as true HD up to
and including 1080p. Naturally there’s built in IR feedback
so you can control the source from the viewing area.
Features:
• Replace your HDMI cable wirelessly and locate your
HDTV or projector wherever you want
• Mount the receiver (out of sight) behind your HDTV
or on the ceiling next to your projector. No more
visible cables
• Watch up to 2 (HD) devices such as Blu-ray® players,
digital video recorders (DVRs), HD set-top boxes,
PS3™ or Xbox® game consoles or standard DVD
players/ recorders elsewhere in your home and easily
switch between the sources connected without
changing plugs
• The built-in HDMI splitter means that you can also
connect an HDTV to the Transmitter so that you can
continue to watch the connected devices locally
• Operate your A/V sources from anywhere, even
through a wall or cupboard door, using the IR
receiver
• The HD signal does not experience any delays and is
therefore perfect for game consoles
• Digitally supports all 480p, 720p, 1080i and 1080p
(Full HD) resolutions from up to 30 metres
• 100% HDCP compliant
Sends the HD signal uncompressed.
*Please note that although this wireless kit is capable of
transmitting a full HD signal through walls and ceilings
it does greatly reduce the tranmission distance. As a
general rule a ‘clear line of sight’ transmission is easily
achieved up to 20 metres, but this can be effected by
local sources of interference from mains points, wireless
routers etc. (although a little time re-positioning the
transmitter and receiver units can usually get around the
problem). For transmissions where the signal is passing
through a wall or ceiling, please be mindful of the
make-up of the wall or ceiling. Naturally a signal will
pass much easier through plaster board and dry-walling
than it will a steel-reinforced concrete structure or stone
walls, and this will effect the signals transmission
greatly. It is also worth noting that if you wish to send a
signal through more than one wall or ceiling the
transmission distance will be reduced further still and
careful consideration needs to be given to where the
units will by positioned. If you would like any
information or advice to assist you please don’t hesitate
to get in touch and we will do our best to help.
We can also offer a solution with a shorter trnamission
range ideal for ‘same room’ applications GV811.
Code
GV821 £285.00
NEW
LOW PRICE