Specifications

Find product information and data sheets on www.keene.co.uk
29
HDMI / White Balance
Code HD42M £84.99
Code HD44M 4x4 Matrix £299.99
HDMI V1.3 Matrix Switch
This is a true HDMI Matrix switchbox that routes any of the
four HDMI inputs to either or both of the two outputs. Input
routing by front panel push button or IR remote control
with LED confirmation. Any four to any two matrix switching
allows for maximum versatility for integrated systems.
Superb value for money
Features:
• Switch easily between any four HDMI sources
• Distributes any of the four inputs to any or any
combination of the two HDMI output displays
• Support HDMI 1.3b
• Support highest video resolution 1080p. • Support
225MHz/2.25Gbps per channel (6.75Gbps all channel)
bandwidth. • Support 12bit per channel (36bit all
channel) deep colour.
• Support HDCP
• External 5V DC@2A Power Supply (included)
Code MX3141CSVA £66.00
4X1 COMPOSITE OR S-VIDEO &
AUDIO SWITCH
MX-3141 series 4x1 Routing Switchers are extremely
wide bandwidth, high performance products that meet
the most demanding requirements for signal routing.
Video as well as Audio are routed. Video Bandwidth is
flat +/- 3db to beyond 300MHz insuring these switchers
will provide an output identical to the source signals.
The MX3141CSVA> switches NTSC or PAL Composite or
S-Video plus Stereo Analog Audio. This unit featureS RS-
232 control capability and are shipped with an IR remote
control, a rack mount kit plus an AC power adapter
Features and Specifications:
• Professional Grade, High Performance Switcher
• Video Bandwidth: Greater than 300MHz
• NTSC and PAL Television Standards
• Inputs: 4x composite video on RCA, S-Video on mini 4
pin din and Stereo Audio on RCA
• Output: 1 x composite video on RCA, S-Video on mini
4 pin din and Stereo Audio on RCA
• Push Button and IR Inputs Selection
• Rugged Metal Case
• Locking DC Power Connector for Security
HDMI 3 X 2 Switcher Splitter
Value Range
The HDMI Amplifier Switch Splitter is an HDMI splitter with
the ability to switch between 3 inputs to display to 2
outputs. It distributes the input into the two identical
outputs simultaneously. Each output can achieve a long
distance transmission of a HDMI signal of up to 15 metres.
Two or more products may be cascaded to achieve a larger
distribution and longer length. Operation is by front push
button control or by (supplied) IR remote.
Features:
• Switch easily between any three HDMI sources to
two displays
• Support HDMI1.3b
• Support highest video resolution 1080p
• Support 225MHz/2.25Gbps per channel
(7.5Gbps all channel) bandwidth
• Support 12bit per channel (36bit all channel)
deep colour
• Support HDCP
Note - Devices with DVI output are not supported due to
the lack of signal control.
Code
HDMI32S £49.99