Specifications

Email your order to us at [e-mail]
26
HDMI 1:2 Distribution
The Coosis 2 way HDMI Distribution amplifier is a
compact device that gives two simultaneous HDMI
outputs from one HDMI input, ideal for viewing on
multiple displays. The Coosis units can also be cascaded
together in a “pyramid” network to provide a one-to-
many solution.
Please note: If the max resolutions of your displays are
different, the EDID functionality will detect all the
connected displays' EDID nformation and auto-match the
output resolution to the lower one. For example, if one
display supports 720P resolution and the rests support
1080P, the signal will be lowered to 720p for all displays.
The quality of an HDMI cable has a great impact on
signal transmission. For best image quality, we suggest
you use a copper based HDMI cable.
Max. recommended cable length after amplifier: 10 metres
Package contents:
1 X Coosis 2 way HDMI Distribution amplifier
1 X Power Supply (+5V DC, 1A)
1 X User Manual
HDMI
HDMI Switchboxes
Value Range
Compact low cost HDMI switchboxes offering excellent
value for money. Auto source selection
(plus IR for SW103)
• Easily switch between HDMI sources
• Full HD 1080p supported
• Compatible with HDMI 1.3b & HDCP
Note – not suitable for DVI devices
(no control signal for auto switching)
Code SW102 two inputs to one output £24.99
Code SW103 three inputs to one output £29.99
Code VS226 £181.71
HDMI to Composite & S-Video Down Convertor
VS-226 HDMI to CV/SV/Stereo Down Converter converts
digital HDMI signals (or a DVI input signal with S/PDIF
coaxial audio) to NTSC or PAL analogue video signals and
also provides a L/R stereo audio output. Besides S-Video
and Composite Video outputs, it provides a re-clocked
HDMI signal which delivers a jitter free bypassed output
of the original HDMI signal. In addition, either a
bitstream derived HDMI audio signal or a coaxial input
signal is processed and provided to an external audio
amplifier via a coaxial S/PDIF digital audio connector.
The VS-226 provides a convenient way for the user to
watch a high definition television program while also
recording it in standard resolution via a DVR or VCR.
Features and Specifications:
• Automatic Signal Conversion
• HDMI 1.2, HDCP1.1 and DVI1.0 compliant
• HDMI or DVI HDTV Signals from 480p to 1080p
• Jitter corrected, Re-Clocked HDMI Bypass signal
• HDMI or DVI HDTV to NTSC or PAL Conversion
• Converts HDMI Bitstream audio to S/PDIF Audio
• Provides analog L/R Stereo Audio Output
• Converts PC signals to UXGA/60Hz to NTSC/PAL
*** Important! Please be aware that this unit will not
output composite video, s-video or stereo audio from an
HDCP protected source. A source such as a Blu-ray or
SkyHD usually uses HDCP and so only the HDMI loop-
through and digital audio ouput will be active. If you
would like any guidance with this please don’t hesitate
to contact us.
Code HDC12 £34.99