Specifications

Email your order to us at [e-mail]
24
HDMI Distribution / RF
HDMI v1.4 3D Over CAT5
New from Aavara, this is one the newly released Professional series of HDMI Cat5 3D Extenders. The PE121L is fully
HDMI v1.4 spec compliant, featuring 3D, IR, Audio Return Channel and HDMI Ethernet Channel Pass-Thru, all via
twin CAT5E cable. Fully compatible with Blu-Ray 3D and featuring IR pass-through this is a great problem solver and
it's compact size makes it very unobtrusive.
Features:
• Uncompressed 1080p HDMI Video/Audio over
Cat5e/6/7
• Local HDMI output on Sender unit
• Full range IR Pass-Thru allows Remote control video
source device from Receiver side
• CEC Pass-thru allows one remote control to sync TV
and AV devices
• Support HDMI v.14 3D video format Blu-Ray player
and 3D TV
• Support HDMI v1.4 Audio Return Channel Pass-Thru
• Support v1.4 HDMI Ethernet Channel
• Hassle free, plug n play
Specification:
• HDMI Spec: v1.4 Compliant
• DVI Spec: v1.0 Compliant
• HDCP Spec: v1.2 Compliant
• Video Format: Up to 1080p 3D Uncompressed Video
• Audio Format: Up to 7.1 Channel, DTS HD Master
Audio/Dolby TrueHD
• HDMI Source Input Port: 1 Port
• HDMI Display Output Port: 1 Port
• LINK Connector: RJ-45 Shielded x2
• Audio Return Channel: Pass-Thru Supported
• HDMI Ethernet Channel: Pass-Thru Supported
• Power Consumption: 3W
• Video Bandwidth: 225MHz
• Single Link Range: 480i, 480p, 576i, 576p, 720p,
1080i, 1080p
• Cat5e Cable Length: 50M in 1080p
• Power Adapter: 5VDC
• Dimensions: 83x71x27mm (WxDxH)
There is a sister product to this the PE121A which
does not have the HDMI pass-through on the sender
for local viewing.
Code PE121L (With local pass-through) £154.99
Code PE121A (Without local pass-through) £139.99
BULK PRICING (50+) and
OEM AVAILABLE on this product
Keene Electronics Wideband Through Modulator
The Keene wideband modulator enables a camcorder,
security camera, DVD, VCR or any other device with AV
(audio video) output to be connected to the aerial
socket of a TV. It can be left permanently connected
and used to distribute signals to other TV’s via the RF
aerial cable. The AV signal can be positioned on any
vacant RF channel between 21 and 69. This means, for
example, that the signal from a security camera could
be introduced into the aerial lead and viewed in the
same way, and as easily, as any normal broadcast
signal. There is a seven segment LED display for clear
channel indication, together with a last channel
memory in the event of a power failure.
Supplied complete with UK mains adaptor
Specifications:
• Power: 12vDC 150mA
• Modulation level: Factory set for 75%.
• Composite video plus audio input
• Scart input (can be used as buffered loop
through output)
• RF Channel: (PLL) channel 21-69
• Compact size (120mm x 85mm x 30mm)
• Weight: 150g
Code
KRFTW £29.99