Specifications

Also available without the mains to USB power supply.
Choose this option if you have have a nearby spare USB port
that can provide power.
IRBKITM FASCIA
IRBKIT Mini supplied with a Fascia mount receiver and a
single emitter. This is designed to allow IR control of
devices out of sight behind the display or cabinet. An
additional IR emitter may be added later if required.
Supplied complete with a mains to USB power supply.
Code IRBKITMF £65.17
Code IRBKITMD £63.71
Code IRBKITMC £54.41
Email your order to us at [e-mail]
22
IR Distribution, AV over CAT
IRBKIT MINI
The Keene IRBKIT MINI is a very compact IR
Distribution Amplifier. It allows you to use your
remote control on equipment located in positions
where your remote wouldn’t normally work. For
example, equipment placed inside cabinets with
closing doors or located on shelves behind you or
around a corner. Because of the compact size and
light weight the IRBKIT mini can also be attached to
the rear of a wall mounted display, ideal for use with
items such as Apple TV®. It also features an
electronically isolated “Direct” input, allowing direct
connection to the IR Blaster output from any other
manufacturers products, very useful with CAT5
Extenders where the single Blaster output cannot
control all of the source equipment.
The unit is very flexible, allowing for a number of
configurations that will solve most IR control
problems.
• USB Power Connection
• Compact Size (60x35x20mm)
• Dual IR Outputs
• Standard IR Receiver Input
• Direct Universal IR Input
IRBKITM DIRECT
IRBKIT Mini supplied with 2 x IRDW Dual Blinking Wands
(four emitters) and a direct input cable (no receiver). This is
designed to re-distribute the IR Blaster output from another
device, eg HDMI extender. Supplied complete with a mains
to USB power supply.
Also available without the mains to USB power supply.
Choose this option if you have have a nearby spare USB port
that can provide power.
Code PU304 £113.58
Digital Audio over CAT6
The PU-304-KIT is designed to send digital audio signals
over 150m. This device supports both Coaxial and
Optical signals and can transmit these signals up to
150m. The PU-304-KIT can be powered using a USB
cable or the supplied PSU adaptor for added flexibility in
a compact design. Digital SPDIF signals are supported
up to a sample rate of 96Khz, and support for Stereo
and Multichannel digital audio (LPCM, DTS, Dolby
Digital, Dolby Digital Plus), also provided.
Features
• Supports Coaxial or Optical digital audio SPDIF signals
• Supports Stereo and Multichannel digital audio
(LPCM, DTS, Dolby Digital, Dolby Digital Plus)
• Supports sample rate up to 96kHz
• Dual transmission 1 x Coaxial and 1 x Optical
• Signals can be extended over single CAT5e/CAT6 up
to 150m
• Power 5V/1A, DC (US/EU standards, CE/FCC/UL
certified)
• Dimension: PU-304RX) 55mm (W) x 85mm (D) x
22mm (H) (PU-304TX) 55mm (W) x 85mm (D) x
22mm (H)
Code IRBKITMFC £58.19
Fascia Direct