Specifications

Find product information and data sheets on www.keene.co.uk

IR Distribution

IRPRO4 BASIC

IRPKIT4 is the basic kit containing the IRPKIT4

Distribution amplifier, USB Power Cable and a UK mains

adaptor.

IRPRO4 STANDARD

IRPKIT4S2 Is the Basic kit plus a Standard IR receiver and

two universal IR emitter wands.

IRPRO4 FASCIA

IRPKIT4F2 is the Basic kit plus a Fascia Mount IR receiver

and two universal IR emitter wands.

Code

IRPKIT4F2 £87.50

IRPRO4 PANEL

IRPKIT4B2 Is the Basic kit plus a Panel Mount IR receiver

(black) and two universal IR emitter wands.

Code

IRPKIT4B2 £99.17

IRPRO4

The unit is very flexible, allowing for a number of

configurations that will solve most IR control problems.

• Four BestSelect IR Receiver inputs

• Direct cabled input that can be used with other

manufacturers IR Blaster outputs

• Four IR Emitter outputs for use with any Keene IR

emitters

• USB power option

IRPRO4 SYSTEM

The Pro4 IR Distribution amplifier has some powerful

features for demanding installations. It has four IR

Receiver inputs, and uniquely all four receivers can be

located in the same room if needed. Normally multiple

IR receivers will cause timing issues and poor

performance but the Pro4 has “BestSelect” technology

which automatically locks on to the strongest IR signal

and shuts down the other inputs within a fraction of a

second, only releasing them again when the code

sequence is complete. It also features a direct cable

input to redistribute other manufacturers IR Blaster

outputs and it can drive up to four dual power IR

emitter outputs. The flexible design allows for a

number of configurations that will solve most IR

control problems.

Code IRPKIT4S2 £87.01

Code IRPKIT4 £61.74