Specifications

Email your order to us at [e-mail]
18
IR Anywhere / Powermind
Code PMID £23.36
Additional receiver for Powermid system
(receives signal from PMID transmitter and gives out IR).
Code
PMIDR £18.99
Additional transmitter for Powermid system (receives IR
from your remote and transmits it to the PMID receiver).
Frequency is 433MHz for current models
(see note below).
Code
PMIDT £18.99
Note on Powermid frequencies: Current model
Powermids use the 433MHz frequency whereas earlier
models used 418MHz. There should be a sticker on the
base of the unit to tell you which you have. 433MHz
transmitters cannot be used with the 418MHz base unit.
A FREE app now available for the iPod and iPad
from the iTunes store
DemoControl
The app gives you a graphical front end with
which to access the 128 stored IR codes
within the memory locations of a KIRA128,
IRCM or KIRARS232. The codes are assigned
to three devices (Display, Set-top box & DVD)
and the app can be used on iPhone or iPad.
The app is available on iTunes for free
(search “DemoControl”).
There is also a full
professional version of
the program available
directly from DemoPad
(www.demopad.com)
that allows you to build
custom screens and
control a virtually limitless
amount of devices.
http://www.demopad.com/democontrollite.html
Available at
iTunes
Powermid XL remote extender
The Powermid remote extender system allows remote
control of IR operated equipment from anywhere in
the house.
Comprises one relay unit, one base unit, 2 power
supplies and full instructions.
Works with any IR remote control, Simply aim your
remote at the relay unit, which converts the IR signal to
a UHF signal and transmits it to the base unit. There,
the signal is converted back to IR and operates your
equipment just as if you were in the room.
Quick and easy to install, and ultra reliable.